Computational issues in large strain elasto-plasticity: an algorithm for mixed hardening and plastic spin
نویسندگان
چکیده
In this paper an algorithm for large strain elasto-plasticity with isotropic hyperelasticity based on the multiplicative decomposition is formulated. The algorithm includes a (possible) constitutive equation for the plastic spin and mixed hardening in which the principal stress and principal backstress directions are not necessarily preserved. It is shown that if the principal trial stress directions are preserved during the plastic flow (as assumed in some algorithms) a plastic spin is inadvertently introduced for the kinematic/mixed hardening case. If the formulation is performed in the principal stress space, a rotation of the backstress is inadvertently introduced as well. The consistent linearization of the algorithm is also addressed in detail. Copyright 2005 John Wiley & Sons, Ltd.
منابع مشابه
Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation
A comprehensive computational study was undertaken to identify the extent to which elastoplastic properties of ductile materials could be determined from instrumented sharp indentation and to quantify the sensitivity of such extracted properties to variations in the measured indentation data. Large deformation finite element computations were carried out for 76 different combinations of elasto-...
متن کاملAbnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing
In this paper, results of an investigation on the strain hardening responses of superalloy MP35N with two average grain sizes of 38 and 1 μm, during room temperature tensile testing are reported. The microstructural evolution of the deformed samples was studied using optical and transmission electron microscopy (TEM) techniques. The strain hardening behavior of the 38 μm material was rather sim...
متن کاملConstitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand
A constitutive multi-laminate based elastic-plastic model developed to be capable of accounting induced anisotropic behavior of granular material such as sand. The fabric feature or grain orientation characteristic effects through medium are considered in a rational way under any complex stress path, including cyclic loading. The salient feature of the developed model is a non-associative on pl...
متن کاملNumerical algorithm for solving the elasto-plastic problem with isotropic hardening and the plane stress state
In this paper a numerical approach of the elasto-plastic problem with mixed hardening in the plane stress state, within the classical constitutive framework of small deformation, is proposed. In the formalized problem, the non-zero normal component of the strain (namely, the component in the direction perpendicular to the plane of stress) is considered to be compatible with the plane stress. We...
متن کاملA Strain Range Dependent Cyclic Plasticity Model
Hysteresis loop curves are highly important for numerical simulations of materials deformation under cyclic loadings. The models mainly take account of only the tensile half of the stabilized cycle in hysteresis loop for identification of the constants which don’t vary with accumulation of plastic strain and strain range of the hysteresis loop. This approach may be quite erroneous particularly ...
متن کامل