Elastic Response of bones at varying strain rates
نویسندگان
چکیده
Mechanical properties of tibial bone at compressive strain rates of 50-200 s are obtained through Split Hopkinson pressure bar. Cylindrical specimens of 12-15 mm diameter and 2-5 mm thickness were used. The Young’s moduli are calculated from linear portion of stress-strain curves. For both cortical and cancellous part of the bones, the Young’s modulus was found to increase with the increasing strain rates. Also for both cancellous and cortical bones the Young’s modulus increases consistently with increase in densities.
منابع مشابه
The impact of bone and suture material properties on mandibular function in Alligator mississippiensis: testing theoretical phenotypes with finite element analysis.
The functional effects of bone and suture stiffness were considered here using finite element models representing three different theoretical phenotypes of an Alligator mississippiensis mandible. The models were loaded using force estimates derived from muscle architecture in dissected specimens, constrained at the 18th and 19th teeth in the upper jaw and 19th tooth of the lower jaw, as well as...
متن کاملTime-Dependent Hygro-Thermal Creep Analysis of Pressurized FGM Rotating Thick Cylindrical Shells Subjected to Uniform Magnetic Field
Time-dependent creep analysis is presented for the calculation of stresses and displacements of axisymmetric thick-walled cylindrical pressure vessels made of functionally graded material (FGM). For the purpose of time-dependent stress analysis in an FGM pressure vessel, material creep behavior and the solutions of the stresses at a time equal to zero (i.e. the initial stress state) are needed....
متن کاملMechanical Properties of Cranial Bones and Sutures in 1–2-Year-Old Infants
BACKGROUND The mechanical properties of 1-2-year-old pediatric cranial bones and sutures and their influential factors were studied to better understand how the pediatric calvarium reacts to loading. MATERIAL AND METHODS Cranial bone and suture specimens were extracted from seven fresh-frozen human infant cadavers (1.5±0.5 years old). Eight specimens were obtained from each subject: two front...
متن کاملHygrothermal Creep and Stress Redistribution Analysis of Temperature and Moisture Dependent Magneto-Electro-Elastic Hollow Sphere
In this article, the time-dependent stress redistribution analysis of magneto-electro-elastic (MEE) thick-walled sphere subjected to mechanical, electrical, magnetic and uniform temperature gradient as well as moisture concentration gradient is presented. Combining constitutive equations of MEE with stress-strain relations as well as strain-displacement relations results in obtaining a differen...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کامل