Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products
نویسندگان
چکیده
منابع مشابه
Strong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملSome Applications of Neural Networks for Condition Monitoring in Industrial Systems for Hot Dip Zinc Galvanizing
The paper describes the abilities of some particular neural network structures (NNS) to provide condition monitoring in a real industrial system, designated for hot dip zinc galvanizing. Condition assessment of a molten zinc bath furnace, and more specifically analysis and prediction of the technical condition in galvanizing kettle walls are also developed in this paper.
متن کاملEffect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملOptimization of exposure time for hot dip galvanizing and study the effects of preflux bath additives on the microstructures of galvanized steel
The objective of this research work is to optimize the time of exposure for hot dip galvanizing of mild steel, so as to achieve such a microstructure of zinc coating that protects mild steel for long against atmospheric corrosion. In order to decide the above mentioned parameter the polished samples, one at a time, were dipped in to 500 g molten zinc at 460 to 470 oC in the crucible for a diffe...
متن کاملAir cooled bainitic steels for strong, seamless pipes Part 1 – alloy design, kinetics and microstructure
Seamless pipes are usually quenched and tempered after manufacture in order to obtain the desired properties. The possibility of avoiding this heat treatment is explored here, by designing steels which transform into an carbide free bainitic microstructure during cooling from the hot processing phase of the pipe. The cooling conditions studied are appropriate for the manufacturing process and c...
متن کامل