Martensitic transformation in Pd-rich Fe–Pd–Pt alloy
نویسندگان
چکیده
The fct martensite morphology and the martensite transformation temperatures are examined for Pd-rich Fe–Pd–Pt alloys, which have the composition of Fe–(xPdyPt)xþy1⁄430 at:%. The replacement of Pd with Pt content causes solution hardening. The shape memory effects are investigated below the Af temperatures. Above the Af temperatures, the stress induced martensite in several grains completely disappeared due to the reverse transformation by unloading. 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
منابع مشابه
Martensitic transformation and shape memory effect in B2 intermetallic compounds of titanium
2014 Crystallographic and kinetic characteristics of martensitic transformations and parameters of shape memory effect in B2 compounds of titanium Ti50Ni50-xXx (X = Fe, Co, Pd, Pt, Au, Cu) and Ti50Pd50-xYx (Y = Fe, Co, Cu), where 0 ~ x ~ 50 are investigated. Temperature, hysteresis, value of reversible deformation and stress of martensitic shear for martensitic transformations and shape memory ...
متن کاملEffect of Aging on Martensitic Transformation in Ti-Rich Ti–Pd Shape Memory Alloy
Effect of aging on successive martensitic transformation in a Ti–47 at%Pd shape memory alloy has been studied by means of differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). After short time aging successive transformation takes place in Ti–47 at%Pd alloy irrespective of aging temperature. On the other hand, after relatively prolonged period only the specimen age...
متن کاملStress-induced FCC/FCT phase transformation in Fe–Pd alloy
We report stress-induced martensitic transformation in tensile loaded Fe–30.5 at.% Pd polycrystals, mainly using optical microscopy. Reverse transformation occurs during unloading. Thermodynamic relationships between applied stress, transformation strain and the latent heat of transformation are examined. 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
متن کاملImproving electrocatalysts for O(2) reduction by fine-tuning the Pt-support interaction: Pt monolayer on the surfaces of a Pd(3)Fe(111) single-crystal alloy.
We improved the effectiveness of Pt monolayer electrocatalysts for the oxygen-reduction reaction (ORR) using a novel approach to fine-tuning the Pt monolayer interaction with its support, exemplified by an annealed Pd(3)Fe(111) single-crystal alloy support having a segregated Pd layer. Low-energy ion scattering and low-energy electron diffraction studies revealed that a segregated Pd layer, wit...
متن کامل-
X-ray diffraction measurements were performed on Co?Pt1-?/Pd, Co/Pd, Co/Fe, and Co/W multilayer samples with different structures, such as Co?Pt1-? alloy layer composition ?, bilayer thickness, and number of bilayers. Multilayer samples were made by magnetron sputtering in a chamber with multi-parallel guns and a position controllable substrate. Co?Pt1-? alloy layers were deposited by cosputter...
متن کامل