Direct Fabry-pérot Effect Removal
نویسنده
چکیده
This study indicates that the removal of reflections from T-ray signals can be carried out in the frequency domain without prior knowledge of material parameters or sample thickness. By fitting polynomials to the logarithm and the argument of the sample’s transfer function, the Fabry-Pérot reflection term is canceled out, leading to disappearance of the reflections in spatial domain. The method successfully removes the reflections for optically thick samples under the condition of noise or amplitude fluctuations. The application to optically thin samples is possible when the samples are subjected to broadband terahertz measurements. The Fabry-Pérot free signal, when used as input to the parameter estimation method, results in correct material parameters with low variance.
منابع مشابه
Enhanced Modulation Bandwidth of a Fabry–Pérot Semiconductor Laser Subject to Light Injection From Another Fabry–Pérot Laser
Variations in optical spectrum and modulation bandwidth of a modulated Fabry–Pérot (FP) semiconductor laser subject to the external light injection from another FP Laser is investigated in this paper. Optimal wavelength matching conditions for two FP lasers are discussed. A series of experiments show that two FP lasers should have a central wavelength overlapping and a mode spacing difference o...
متن کاملHigh-sensitivity measurements of the Kerr constant in gases using a Fabry–Pérot-based ellipsometer
The dc-Kerr constant was measured with high sensitivity in several gases, using a novel ellipsometer, which is based on a high-finesse Fabry–Pérot interferometer. An effective interaction length of 5.26 km was achieved by using a Fabry–Pérot interferometer with intracavity electrodes, yielding a single-pass sensitivity of ≈ 10 nanoradian. The dc-Kerr constants of CO2, N2, and O2 were determined...
متن کاملDesign and Demonstration of a Bulk Micromachined Fabry–Pérot g-Resolution Accelerometer
A high resolution, passive, bulk-micromachined accelerometer based on the transmission-type intrinsic Fabry–Pérot interferometer has been designed, fabricated and, for the first time, experimentally evaluated via direct inertial characterization. The device characterization includes frequencyand time-domain evaluation. The sensor characteristics of bandwidth, range, sensitivity, and resolution ...
متن کامل