Reflecting Cell Model for SAW Structures
نویسندگان
چکیده
The study presents three-port reflecting cell model for analyzing SAW structures employing strong electrode reflections. Basic objective is to analytically approximate all the p-matrix elements for a SAW structure in terms of reflection, transduction, and transmission strengths. This model is an approximate one and it does not take into account the effects of bulk wave excitation, diffraction, and propagation loss etc for convenience. This 3-port reflecting cell model has been used to show that it is possible to realize Infinite Impulse Response (IIR) filters on SAW devices, which can result in much smaller size as compared to very high order Finite Impulse Response (FIR) SAW filters for given specifications. Simulation results for this new 3-port reflecting cell model and IIR filter realization are presented for validation purpose.
منابع مشابه
Distributed Reflector Structure and Diffraction Grating Structure in the Solar Cell
Today, due to qualitative growth and scientific advances, energy, especially electricity is increasingly needed by human society. One of the almost endless and pure energy which have been paid attention over the years is the solar energy. Solar cells directly convert solar energy into electrical energy and are one of the main blocks of photovoltaic systems. Significant improvement has been made...
متن کاملDesign and simulation of a fast SAW waveguide with Comsol software
In this paper, the structure of SAW has been studied. In previous work in SAW, materials such as lithium niobium, lithium tantalite and gallium nitride were used in the structure of SAW, and thus had a low operating frequency and the highest reported operating frequency was about 4 GHz. In this paper, aluminum nitride and gallium nitride in the SAW structure are used in combination. The electro...
متن کاملSurface Acoustic Waves (SAW)-Based Biosensing for Quantification of Cell Growth in 2D and 3D Cultures
Detection and quantification of cell viability and growth in two-dimensional (2D) and three-dimensional (3D) cell cultures commonly involve harvesting of cells and therefore requires a parallel set-up of several replicates for time-lapse or dose-response studies. Thus, developing a non-invasive and touch-free detection of cell growth in longitudinal studies of 3D tumor spheroid cultures or of s...
متن کاملLiquid sensor probe using reflecting SH-SAW delay line
A new liquid sensor probe has been designed by using SH-SAW device. Shear horizontal mode surface acoustic wave (SH-SAW) has a unique characteristic of complete reflection at the free edges of the substrate. The SH-SAWare excited on a 368 YX LiTaO3 and the right angle edge of the substrate has been used to reflect the SAW. Multi-channel reflecting SAW delay lines were constructed on the substra...
متن کاملCombining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process
Predicting the wear performance of circular diamond saw in the process of sawing hard dimensional stone is an important step in reducing production costs in the stone sawing industry. In the present research work, the effective parameters on circular diamond saw wear are defined, and then the weight of each parameter is determined through adopting a fuzzy rock engineering system (Fuzzy RES) bas...
متن کامل