Comparison of adiabatic and Conventional CMOS
نویسندگان
چکیده
-The Power dissipation in conventional CMOS circuits can be minimized through adiabatic technique. By adiabatic technique dissipation in PMOS network can be minimized and some of energy stored at load capacitance can be recycled instead of dissipated as heat. But the adiabatic technique is highly dependent on parameter variation.With the help of TANNER simulations, the energy consumption is analyzed by variation of parameter. In analysis, two logic families, ECRL (Efficient Charge Recovery Logic) and PFAL (Positive Feedback Adiabatic Logic) are compared with conventional CMOS logic for inverter. It is finding that adiabatic technique is good choice for low power application in specified frequency range.
منابع مشابه
An Adiabatic Power-Supply Controller For Asynchronous Logic Circuits
Adiabatic logic can offer significant power reductions in comparison to conventional CMOS circuits ([1], [2]). Although numerous architectures have been proposed in the literature for synchronous circuit implementations, not much work has been done on asynchronous logic due to the difficulties of such implementations. This paper presents a new adiabatic power supply controller for asynchronous ...
متن کاملUltra Low Power Symmetric Pass Gate Adiabatic Logic with CNTFET for Secure IoT Applications
With the advent and development of the Internet of Things, new needs arose and more attention was paid to these needs. These needs include: low power consumption, low area consumption, low supply voltage, higher security and so on. Many solutions have been proposed to improve each one of these needs. In this paper, we try to reduce the power consumption and enhance the security by using SPGAL, ...
متن کاملDesign and Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic for Low Power VLSI Application
In recent years, low power circuit design has been an important issue in VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. energy. This paper proposes an Adder circuit based on energy efficient two-phase clocked adiabatic logic. A simulative investigation on the proposed 1-bit ful...
متن کاملComparative Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic Circuits
-In recent years, low power circuit design has been an important issue in System on Chip (SoC) and VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. Adiabatic circuits are those circuits which work on the principle of adiabatic charging and discharging and which recycle the energy...
متن کاملSingle Phase Energy Recovery Logic and Conventional CMOS Logic: A Comparative Analysis
Extensive research is carried-out worldwide to design energy-efficient adiabatic circuits for such biomedical and space applications where conventional energy is limited and speed is not critical. In this paper a new single phase adiabatic or energy recovery logic is proposed and extensively analyzed the energy performance with technology scaling. We present a comparative study among proposed l...
متن کامل