Kinematic Hybrid Position/Force Control
نویسنده
چکیده
The paper aims to describe kinematic hybrid position/force control for a three-degree-of-freedom (3-DOF) in-parallel actuated manipulator, and its application to peg-inhole task about 10μm clearance. The control system consists of a low-level position servo driven by force feedback in base coordinates. The computation required for the control is only inverse kinematics, which is very simple for the parallel-link manipulator. Assisted by a human operator, the motion is generated by using force-torque based joystick commands and/or preplanned motion data. In teleoperation mode, the human operator can intervene and superpose corrective motions over the preplanned searching motion. Keywords—Parallel Manipulator; Kinematics; Hybrid position/force control; Teleoperation
منابع مشابه
A New Approach for the Formulation of the Admittance and Hybrid Position/Force Control Schemes for Industrial Manipulators
This paper briefly discusses two of the well-known position/force control schemes used for industrial manipulators: Admittance Control and Hybrid Position/Force Control. In order to eliminate the instability problem that may occur in the customary versions of these schemes for large position errors, a modification is proposed, which is based on determining the joint-space position errors using ...
متن کاملHybrid Force/position Control of Redundant Mobile Manipulators
This paper presents a novel force control scheme for redundant mobile manipulators. Based on a decoupled and linearized dynamic model for integrated mobile platform and on-board manipulator, robotic tasks involving both position and output force control are discussed. Take the advantage of the kinematic redundancy of mobile manipulators, explicit force and position control at the same task dire...
متن کاملDynamic Analysis in Variable Structure Position/Force Hybrid Control of Manipulators with Impact Phenomena
Abstract − In this paper the implementation of several variable structure algorithms in the position/force hybrid control of robotic manipulators is studied. The robustness and performances of the system are analyzed both in terms of time and frequency responses. This paper also studies the impact phenomena and it is demonstrated that the transient response, from free to constrained motion, can...
متن کاملControl of a wrist joint motion simulator: A phantom study
The presence of muscle redundancy and co-activation of agonist-antagonist pairs in vivo makes the optimization of the load distribution between muscles in physiologic joint simulators vital. This optimization is usually achieved by employing different control strategies based on position and/or force feedback. A muscle activated physiologic wrist simulator was developed to test and iteratively ...
متن کاملTowards a Naturalistic Brain-Machine Interface: Hybrid Torque and Position Control Allows Generalization to Novel Dynamics
Realization of reaching and grasping movements by a paralytic person or an amputee would greatly facilitate her/his activities of daily living. Towards this goal, control of a computer cursor or robotic arm using neural signals has been demonstrated in rodents, non-human primates and humans. This technology is commonly referred to as a Brain-Machine Interface (BMI) and is achieved by prediction...
متن کامل