Controlling the work function of indium tin oxide: differentiating dipolar from local surface effects.
نویسندگان
چکیده
Indium tin oxide (ITO) reacts with tetra(tert-butoxy)tin to give surface bound alkoxytin species. Ligand exchange occurs in these surface bound species by reaction with substituted phenols. The speciation of surface phenoxides was measured in ultrahigh vacuum by X-ray photoelectron spectroscopy, as was the work function for the surface modified ITO. It is shown that the molecular dipole moment of the phenol correlates strongly with the measured ITO work function change; no such correlation exists between the acidity of the phenol and this measured change in work function. Results are consistent therefore with an electrostatic model and not with one involving electronegativities of the ligated phenoxide oxygens.
منابع مشابه
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملDifferentiating surface and bulk interactions using localized surface plasmon resonances of gold nanorods.
We demonstrate a novel localized surface-plasmon resonance sensor that can distinguish surface binding interactions from interfering bulk effects. This is accomplished by utilizing the longitudinal and transverse plasmon modes of gold nanorods. We have investigated, both numerically and experimentally, the effect of change in background refractive index and surface binding on the two resonances...
متن کاملTuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles
By varying the density of solution-processed lithium fluoride (sol-LiF) nanoparticles at the interface between tin-doped indium oxide (ITO) and poly(3,4ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), we have demonstrated that the electronic hole collection efficiency of an organic photovoltaic cell can be optimized through tuning the energy level alignment at the ITO/PEDOT:PSS inter...
متن کاملDirect comparison of photoemission spectroscopy and in situ Kelvin probe work function measurements on indium tin oxide films
The work function of commercially available indium tin oxide (ITO) films on glass substrates was measured using photoemission spectroscopy (PES) and ultra-high vacuum (UHV) Kelvin probe in direct comparison. Absolute Kelvin probe work function values were determined via calibration of the measured contact potential difference (CPD) using an in situ sputtered Au reference sample. The Kelvin prob...
متن کاملSynthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains
In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of the American Chemical Society
دوره 124 13 شماره
صفحات -
تاریخ انتشار 2002