A Thin Plate Model for Predicting Rotating Losses in Magnetic Bearings
نویسندگان
چکیده
Previously, thin plate assumptions have been used to obtain a one-dimensional eddy current model for predicting the stationary, transformer-type losses in magnetic bearings built out of laminated material. Using similar assumptions as in the 1-D eddy current model, rotating losses can be predicted for a laminated heteropolar radial magnetic bearing. The thin plate model of rotating losses yields a hybrid analytical-boundary element model that is computationally inexpensive to implement. Predictions from this model compare favorably to losses experimentally measured in rotor run-down tests.
منابع مشابه
Prediction of rotating losses in heteropolar radial magnetic bearings
Previously, thin plate assumptions have been used to obtain a one-dimensional eddy current model for predicting the stationary, transformer-type losses in magnetic bearings built out of laminated material. Using similar assumptions as in the 1-D eddy current model, rotating losses can be predicted for a laminated heteropolar radial magnetic bearing. The thin plate model of rotating losses yield...
متن کاملTitle: Influence of actuator geometry on rotating losses in heteropolar magnetic bearings
Recently, work on rotating losses in magnetic bearings has focused mainly on the measurement of rotating losses, and on the creation of models that attempt to reproduce these results. Though there has been some success on both counts, there has been less emphasis on interpreting what these results mean in terms of practical guidelines for the design of low-loss bearings. The present work reform...
متن کاملMagneto-Thermo-Elastic Stresses and Perturbation of Magnetic Field Vector in a Thin Functionally Graded Rotating Disk
In this paper, a semi-analytical solution for magneto-thermo-elastic problem in an axisymmetric functionally graded (FG) hollow rotating disk with constant thickness placed in uniform magnetic and thermal fields with heat convection from disk’s surfaces is presented. Solution for stresses and perturbation of magnetic field vector in a thin FG rotating disk is determined using infinitesimal theo...
متن کاملFree convective heat and mass transfer of magnetic bio-convective flow caused by a rotating cone and plate in the presence of nonlinear thermal radiation and cross diffusion
This article explores the heat and mass transfer behaviour of magnetohydrodynamic free convective flow past a permeable vertical rotating cone and a plate filled with gyrotactic microorganisms in the presence of nonlinear thermal radiation, thermo diffusion and diffusion thermo effects. We presented dual solutions for the flow over a rotating cone and a rotating flat plate cases. Similarity var...
متن کاملReduced-Friction Passive Magnetic Bearing: Innovative Design and Novel Characterization Technique
Friction is mostly unwanted in rotating machines. In order to reduce its impact on the system, the integration of magnetic bearings is frequently regarded as a valid solution. In rotating systems like flywheel energy storage systems (FESS), mechanical losses created by mechanical bearings greatly reduce the overall performance. Magnetic bearings are thus frequently integrated in FESS to elimina...
متن کامل