Error Modeling of Static Energy Meters
نویسندگان
چکیده
− The scope here is to derive a model of the measurement error of static energy meters. The model proposed is based on three error parameters: gain, phase and bias error. The validity of the model is confirmed through the statistical analysis of the measurement results obtained during the calibration of a commercial energy meter, compliant with the Measuring Instruments Directive 2004/22/EC. The experiments also involved operating conditions of the meter beyond those required by the calibration procedure prescribed by the relevant standards. A further analysis is offered aimed at verifying the statistical significance of the parameters of the model.
منابع مشابه
Modeling Static Bruising in Apple Fruits: A Comparative Study, Part I: Analytical Approach
ABSTRACT- Bruising degrades the quality of fresh apple fruits. Reducing bruise damage is of utmost importance in designing and developing processing equipments. The main objective of the present study was to introduce an analytical method to predict the allowable static load applicable to apple fruits. To predict the strain energy absorbed by the fruit, a point load was applied on the solid sph...
متن کاملOn the methodologies for the calibration of static electricity meters in the presence of harmonic distortion
Abstrac t This paper is focused on the problems related to the calibration of static electricity meters with nonsinusoidal test waveforms. This is an up-to-date issue since the harmonic distortion levels are ever increasing, especially in low-voltage power systems, and in such conditions the performances of the modern static electricity meters can be negatively affected, depending on the implem...
متن کاملModeling Static Bruising in Apple Fruits: A Comparative Study, Part II: Finite Element Approach
ABSTRACT- Mechanical damage degrades fruit quality in the chain from production to the consumption. Damage is due to static, impact and vibration loads during processes such as harvesting, transportation, sorting and bulk storage. In the present study finite element (FE) models were used to simulate the process of static bruising for apple fruits by contact of the fruit with a hard surface. Thr...
متن کاملModeling of Optimal Distances of Surveying Stations for Monitoring Astable Engineering Structures Using Geodetic Methods
Large and astable engineering structures are the great importance and the behavior of such structures is usually made in Geotechnical and Geodetic methods (engineering geodesy). In the geodetic methods, the selection of appropriate surveying stations, in terms of distribution, locations, and distant of the target points to stations the control network, have a significant role in determining th...
متن کاملمدلسازی عددی روگذری موج از موجشکن توده سنگی با در نظر گرفتن اثر تخلخل
Wave overtopping on the breakwaters is an important issue in breakwaters’ design. Most of the previous studies focused on experimental researches and numerical modeling of irregular wave overtopping particularly on porous breakwaters has not been studied. In the present study, the verification between experimental studies and numerical modeling of irregular waves overtopping on the porous...
متن کامل