Fundamental Study on Cross Axis Grinding Method
نویسندگان
چکیده
In this study, it is experimentally investigated that the surface generation process in the cross axis grinding method with small diameter grinding wheel. In this grinding method, workpiece surface speed and sum of both wheel working surface speed and wheel feed rate crossed each other. Therefore, it is the largest characteristic that the cross angle, which is defined as the angle between the workpiece surface speed and sum of the wheel speed and wheel feed rate, is able to set wide area with systematic parameter setting. Then, it is made clear that the surface roughness is getting smoother with decrease of the cross angle.
منابع مشابه
Polishing Characteristics of ELID-Ground Surface of Nano Precision Optical Elements
This paper describes an ultra precision polishing method of aspherical mirrors, and the fundamental research on polishing characteristics. The aspherical mirrors with a diameter of about 30mm made by fused silica glass and CVD-SiC were ELID (electrolytic in-process dressing)-ground to high form accuracy with #4000 cast iron bonded diamond wheel, and then polished with a small polishing tool. As...
متن کاملA practical approach for simulation and manufacturing of a ball-end mill using a 5-axis CNC grinding machine
This paper presents a detailed manufacturing model that can be used for grinding a ball-end mill using 5-axis CNC (computer numerical controlled) grinding machine. The profile of the helical groove can be calculated exactly using the given wheel profile and relative movements between the workpiece and the grinding wheel. The proposed model is related to some analytical, differential geometry an...
متن کاملPrecision machining and measurement of micro aspheric molds
Abstract –Demands of micro aspheric optical components such as lenses and mirrors are increasing for installing to the digital devices such as DVD, Digital camera, mobile phone and virtual reality system. As the devices become to be more compact and complicated, the molds shapes of lens and mirrors would become smaller and complicated, and then would become more difficult to be machined and mea...
متن کاملA Manufacturing Model for Ball-End Mill Gashing Based on a CAM System
To facilitate the manufacturing of a ball-end mill, this paper presents an algorithm for ball-end mills gashing by using a five-axis computer numerical control (CNC) grinding machine. In this study, the normal helix models are proposed. Then, based on the cutting edge geometric model and the machining mode of the five-axis computer numerical control (CNC) grinding machine, the coordinate of the...
متن کاملPath Planning for Robot-Assisted Grinding Processes
Path planning for a robot-assisted surface finishing system with an active torque controller is presented in this paper. We utilize a dexterous manipulator to attain the desired position and orientation in three-dimensional space during finishing processes. A single-axis active controller consists of a dc motor and a software observer is attached to the robot wrist and used to actuate a pneumat...
متن کامل