Multiple Mode Current Flowing Passive Piezoelectric Shunt Controller
نویسندگان
چکیده
A method for multiple mode piezoelectric shunt damping will be presented in this paper. The proposed \current owing" shunt controller has a number of bene ts compared to previous shunt damping schemes; it is simpler to implement and requires small number of passive circuit elements. The passive control strategy is validated through experimentation on two piezoelectric laminated structures. c 2002 Academic Press
منابع مشابه
A broadband controller for shunt piezoelectric damping of structural vibration
Abstract In this paper a broadband active shunt technique for controlling vibration in piezoelectric laminated structures is proposed. The effect of the negative capacitance controller is studied theoretically and then validated experimentally on a piezoelectric laminated simply supported plate. The ‘negative capacitance controller’ is similar in nature to passive shunt damping techniques, as a...
متن کاملThe Effect of Artificially Reducing the Size of Inductors in Piezoelectric Shunt Damping Circuits
Connecting a passive electrical network to a structurally attached piezoelectric transducer is referred to as passive shunt damping. Current shunt circuit designs, e.g. a single mode L¡R network, typically require large inductance values of up to thousands of Henries. In practice, discrete inductors are limited in size to around 1 H: By placing an additional capacitance across the terminals of ...
متن کاملOnline-tuned Multi-mode Resonant Piezoelectric Shunt for Broadband Vibration Suppression
Broadband structural vibration can be suppressed through the connection of an electrical impedance to the terminals of a bonded piezoelectric transducer. This is referred to as piezoelectric shunt damping. Good nominal damping performance has been obtained with resonant shunts, but these shunts are highly sensitive to variations in structural resonance frequencies. In this paper, we present an ...
متن کاملMultimodal Vibration Damping through Piezoelectric Patches and Optimal Resonant Shunt Circuits
Piezoelectric elements connected to shunt circuits and bonded to a mechanical structure form a dissipation device that can be designed to add damping to the mechanical system. Due to the piezoelectric effect, part of the vibration energy is transformed into electrical energy that can be conveniently dissipated. Therefore, by using appropriate electrical circuits, it is possible to dissipate str...
متن کاملOn the Feedback Structure of Wideband Piezoelectric Shunt Damping Systems
This paper studies the feedback structure associated with piezoelectric shunt damping systems and introduces a new impedance structure for multi-mode piezoelectric shunt damping. The impedance is shown to be realizable using passive circuit components and digital implementation of the associated admittance transfer function is discussed. (Some figures in this article are in colour only in the e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002