Flywheel angular velocity model for misfire and driveline disturbance simulation
نویسندگان
چکیده
A flywheel angular velocity model for misfire and disturbance simulation is presented. Applications of the model are, for example, initial parameter calibration and robustness analysis of misfire detection algorithms. An analytical cylinder pressure model is used to model cylinder torque and a multi-body model with torsional flexibilities is used to model crankshaft and driveline oscillations. Misfires, cylinder variations, changes in auxiliary load, and flywheel manufacturing errors can be injected in the model and the resulting speed variations can be simulated. A qualitative validation of the model shows that simulated angular velocity captures the amplitude and oscillatory behavior of measurement data and the effects of different phenomena, such as misfire and flywheel manufacturing errors.
منابع مشابه
Analysis and optimization with the Kullback-Leibler divergence for misfire detection using estimated torque∗
Engine misfire detection is an important part of the On-Board Diagnostics (OBDII) legislations to reduce exhaust emissions and avoid damage to the catalytic converters. The flywheel angular velocity signal is analyzed, investigating how to use the signal in order to best detect misfires. An algorithm for engine misfire detection is proposed based on the flywheel angular velocity signal. The fly...
متن کاملDiagnosability analysis and FDI system design for uncertain systems
Our society depends on advanced and complex technical systems and machines, for example, cars for transportation, industrial robots in production lines, satellites for communication, and power plants for energy production. Consequences of a fault in such a system can be severe and result in human casualties, environmentally harmful emissions, high repair costs, or economical losses caused by un...
متن کاملMisfire Detection System based on the Measure of Crankshaft Angular Velocity
Misfire detection systems are becoming increasingly important in automotive market due to recent environmental issues {Euro rules}. An early misfire diagnosis also allows to prevent damages to the exhaust emission system and consequent costs for the user. Today few low cost methods exists in order to precisely detect single misfires in real time, the majority in fact require the use of expensiv...
متن کاملModeling Flywheel-speed Variations Based on Cylinder Pressure
Combustion supervision by evaluating flywheel speed variations is a common approach in the automotive industry. This often involves preliminary measurements. An adequate model for simulating flywheel speed can assist to avoid some of these preliminary measurements. A physical nonlinear model for simulating flywheel speed based on cylinder pressure information is investigated in this work. Measu...
متن کاملInvestigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050
In this paper, torsion extrusion (TE) process on 1050 aluminum alloy was investigated by simulation as a severe plastic deformation (SPD) method and the effects of friction coefficient, angular velocity of the rotating die and punch speed on maximum punch force were studied. A finite element (FE) model was developed to simulate the TE process via DEFORM software. The FE results were validated co...
متن کامل