A load of hot air.
نویسنده
چکیده
منابع مشابه
Determination of Optimum Insulation Thickness for Building Walls in Iran Using Life Cycle Cost Analysis
Air-Conditioning (AC) systems are responsible for a considerable portion of the energy consumption in buildings located in high cooling load requiring regions of Iran. In addition, the heat flow through the buildingschr('39') external walls plays a major role in cooling load estimations for the countrychr('39')s hot regions. Therefore, application of insulation materials in external walls has g...
متن کاملThermal Modeling for Predication of Automobile Cabin Air Temperature
Thermal modeling of an automotive cabin was performed in this paper to predict the inside cabin air temperature. To implement this task, thermal and ventilation loads were estimated and the mass and energy balance conservation equations for dry air and water vapor with considering a new parameter (air circulation ratio) as well as the balance equations of internal components of a cabin were de...
متن کاملDetermination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique
An axisymmetric hot closed die-forging process has been studied by physical modeling technique using the plasticine. To observe the material flow pattern, layers of plasticine with different colors were used. The normal direction to the layers was considered a principal direction. The strain distribution was obtained by measuring the thickness of the plasticine layers. Based on the strain distr...
متن کاملMathematical Modeling of Hot Air Drying of Spinach Leaves in Universal Hot Air Oven
The objective of this study was to develop a model for drying characteristic curve of Spinach in Universal Hot Air Oven .Drying experiment were conducted using a constant air velocity2.2m/s and three drying air temperature of 55, 65, and75 o C with two pretreatment conditions and load densities that are given respectively condition (Blanched and Unblanched) load density (3kg/m 2 , 3.5 kg/m 2 )....
متن کاملKinetic Modeling of Mass Transfer During Roasting of Soybeans Using Combined Infrared-Hot Air Heating
ABSTRACT: Roasting is one of the widespread methods for processing of nuts and beans that significantly enhances the flavor, color, texture and appearance of the products. In this research the kinetics and modeling of soybean roasting using combined infrared-hot air system and consumption of energy were investigated. The effect of the hot air temperature (160, 180 and 200 ºC), infrared powers (...
متن کاملExperimental investigations on a pre-chamber spark plug with variable heat range by integrating a controlled hot surface
In gasoline engines, pre-chamber spark ignition systems are used to achieve high efficiency and low NOx emissions when operating under lean conditions. While a cold pre-chamber spark plug can lead to misfiring and flame quenching under cold start or part load operation, a hot pre-chamber can result in uncontrolled pre-ignition phenomena under full load operation. This paper presents an approach...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Emergency medicine journal : EMJ
دوره 22 7 شماره
صفحات -
تاریخ انتشار 2005