Development of Nanostructure Based Corrosion-Barrier Coatings on Steel for Transmutation Applications
نویسندگان
چکیده
Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.
منابع مشابه
Effect of nitriding temperature on the nanostructure and corrosion properties of Nickel coated 304 stainless steel
Nickel films of 150 nm thickness were deposited on 304 stainless steel and post annealed under flow of nitrogen at different temperatures. The prepared samples were corrosion tested in 1.0 M H2SO4 solution using potentiodynamic polarization technique. Crystallographic and morphological structure of the samples were analysed by X-ray diffraction XRD and atomic force microscopy AFM respectively b...
متن کاملCorrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings
In this paper, polymer-based nanocomposites powder were applied on the surface of plain carbon steel by electrostatic device and then were cured by microwave. The effect of adding nanoparticles on the corrosion resistance properties of the coatings was investigated by Electrochemical Impedance Spectroscopy and immersion test in 3.5 NaCl solution. Coatings structure and morphology of nanoparticl...
متن کاملCorrosion Protection of Steel Using Nonanomalous Ni-Zn-P Coatings
A novel technique for obtaining nonanomalous Ni-Zn-P coatings with high Ni content ~74 wt % as compared to 15-20 wt % in the conventional plating method! has been developed. These coatings show promise as a replacement for Cd in sacrificially protecting steel. Ni-Zn-P coatings were deposited using an electroless method from a solution containing NiSO4 , complexing agent and ammonium chloride. V...
متن کاملStudy of multilayer and multi-component coatings deposited using cathodic Arc technique on H-13 hot work steel for die-casting applications
Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...
متن کامل