Analytical Crack Propagation Scenario for Gear Teeth and Time-Varying Gear Mesh Stiffness
نویسندگان
چکیده
In this paper an analytical crack propagation scenario is proposed which assumes that a crack propagates in the tooth root in both the crack depth direction and the tooth width direction, and which is more reasonable and realistic for non-uniform load distribution cases than the other presented scenarios. An analytical approach is used for quantifying the loss of time-varying gear mesh stiffness with the presence of crack propagation in the gear tooth root. The proposed crack propagation scenario can be applied for crack propagation modelling and monitoring simulation, but further research is required for comparison and evaluation of all the presented crack propagation scenarios from the condition monitoring point of view. Keywords—Crack propagation, Gear tooth crack, Time varying gear mesh stiffness.
منابع مشابه
Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملNonlinear Dynamics Analysis of a Gear-Shaft-Bearing System with Breathing Crack and Tooth Wear Faults
Considering backlash, time-varying mesh stiffness and radial clearance of bearing, nonlinear dynamic model of gear bearing flexible shaft system is established taking into account breathing crack in shaft and tooth wear. Nonlinear dynamic equations are solved by Runge-Kutta method. Effect of backlash, crack in shaft and tooth wear faults on the nonlinear dynamic behavior of gear-shaft-bearing s...
متن کاملتاثیر اصطکاک خشک بر ارتعاشات غیرخطی سیستم انتقال قدرت تک مرحله ای ترک دار
: The gear systems are widely used in industry to transmit the power or change the direction of the torque. Due to the extensive usage of the gears, the detailed designing and the subsequent maintenance of these systems are more and more evident. System recognition can be achieved through modeling the system, investigating the system behavior, and comparing the results obtained through the mode...
متن کاملApplication of Joint Time Frequency Analysis for Early Crack Detection on One-stage Gear Drive
Original scientific paper The relationships between the existence of gear teeth cracks as a cause and symptoms emerging as housing vibrations that can be detected with signals measured was investigated numerically and experimentally. Experimental measurements on one-stage gear drives have been carried out involving gears built in with different notch length in tooth root. Signals measured as ac...
متن کاملMulti-body Dynamics and Modal Analysis of Compliant Gear Bodies
This paper extends the multi-body dynamics modelling strategy for rigid gears to include compliant gear bodies in multi-mesh transmissions. Only external, fixed center, helical or spur gears are considered. This formulation combines distributed gear mesh stiffness and gear blank compliance models in a multi-body dynamics framework resulting in a set of non-linear differential equations with tim...
متن کامل