Effect of Ambient Temperature on the Performance of a Combined Cycle Power Plant
نویسندگان
چکیده
The aim of the present paper is to examine the effect of ambient temperature on the performance of a combined cycle power plant. For this work, the combined cycle plant chosen is NTPC (National Thermal Power Corporation) Dadri, India where a gas unit of 817 MW is installed. The effect of ambient temperature on combined cycle efficiency, gas turbine cycle efficiency, exergy destruction in different components, exergy loss via exhaust and air fuel ratio at lower and higher turbine inlet temperature are reported. The results show that the net decrease in combined cycle efficiency is 0.04% and the variation in exergy destruction of different plant components is up to 0.35% for every ◦C rise in ambient temperature.
منابع مشابه
Optimization and increase production and efficiency of gas turbines GE-F9 using Media evaporative cooler in Fars combined cycle power plant
Gas turbines play an important role in supplying power for the country especially in peak electricity load. The main disadvantages are the turbines, they produce large changes are a result of climate change. However, in times of peak electricity grid and at the same time warm months, can produce gas turbines under the effect of ambient temperature, the amount of reduced considerably. The method...
متن کاملThe Effect of Media System on the Performance and Pollutant Emissions of v94.2 Gas Generators in Ansaldo Unit of Yazd Combined Cycle Power Plant
Due to the increasing importance of energy, optimizing power generation systems and reducing their internal energy consumption are essential issues. Analysis of power generation systems is necessary regarding energy and recognition of their functioning. The present study investigated the effect of media system on the performance and emissions of environmental pollutants in Thermoflow Software b...
متن کاملThermodynamic modeling and comprehensive off-design performance analysis of a real integrated solar combined cycle power plant
In this paper thermodynamic modeling and comprehensive performance analysis of a real integrated solar combined cycle (ISCC) power plant are performed. Performance of the plant cycle is assessed in off-design condition and in two operation modes of power-boosting and fuel-saving. Such an approach has not been considered for an ISCC plant in the previous studies. Under studied ISCC which is loca...
متن کاملSensitivity analysis of parameters affecting carbon footprint of fossil fuel power plants based on life cycle assessment scenarios
In this study a pseudo comprehensive carbon footprint model for fossil fuel power plants is presented. Parameters which their effects are considered in this study include: plant type, fuel type, fuel transmission type, internal consumption of the plant, degradation, site ambient condition, transmission and distribution losses. Investigating internal consumption, degradation and site ambient con...
متن کاملModeling of a Geothermal Cycle Condenser in a Combined Diesel Power Cycle: Case Study of 42 MW Diesel Power Plant in Moghan and Ardabil
This paper presents the results of a research into the feasibility of recovering waste heat and determining design parameters of a recovery boiler for a set of medium-speed diesel generators with a capacity of 7 MW (the nominal capacity of all units is 42 MW, which would be a study on a unit). And is used to generate electricity. The main purpose of this study is to design a thermal waste recov...
متن کاملAnalysis and Simulation of the Effect of Turbine Inlet Temperature on Thermodynamic Performance of the Water – Ammonia Combined Cycle
Due to the importance of power generation cycles including combined cycle, many studies have been done in recent years and many researchers have been tried to optimize these cycles by using of existing methods. In this study, the Water-Ammonia cycle is investigated in the combined-cycle of the Water-Ammonia, working dual Water-Ammonia mixture is used as the works fluid. This cycle can be used f...
متن کامل