Prediction of fatigue life of reinforced concrete bridges using Fracture Mechanics

نویسنده

  • M. Rocha
چکیده

With the occurrence of higher and more frequent axle loads, bridges are more solicited by fatigue loading. Bridge elements like deck slabs are subjected to a high number of stress cycles at relatively small stress magnitudes. The application of Fracture Mechanics as a useful tool for the analysis of fatigue crack growth in steel elements was demonstrated by Paris et al. in the early 1960s. With respect to reinforced concrete, the fatigue strength of the steel reinforcement is determinant. The fatigue behaviour of the steel reinforcement is similar to that of structural steel. The fatigue relevant parameters are the stress ranges, the number of fatigue cycles and stress concentrations. This paper presents a study to predict the fatigue life of steel reinforcement based on the Paris law. The method will be validated by a case study. Bridge Maintenance, Safety, Management, Resilience and Sustainability – Biondini & Frangopol (Eds) © 2012 Taylor & Francis Group, London, ISBN 978-0-415-62124-3

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fracture mechanics-based life prediction of a riveted lap joint

In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...

متن کامل

Fatigue Life Prediction of Rivet Joints

Strength reduction in structures like an aircraft could be resulted as cyclic loads over a period of time and is an important factor for structural life prediction. Service loads are emphasized at the regions of stress concentration, mostly at the connection of components. The initial flaw prompting the service life was expected by using the Equivalent Initial Flaw Size (EIFS) which has been re...

متن کامل

Assessing the Performance of Corroding RC Bridge Decks: A Critical Review of Corrosion Propagation Models

Corrosion of steel reinforcement is one of the most prevalent causes of reinforced concrete (RC) structures deterioration in chloride-contaminated environments. As a result, evaluating the impact of any possible corrosion-induced damages to reinforced concrete bridges strongly affects management decisions: such as inspection, maintenance and repair actions. The corrosion propagation phase is a ...

متن کامل

PARAMETRIC STUDY: COST OPTIMIZATION OF NON-PRISMATIC REINFORCED CONCRETE BOX GIRDER BRIDGES WITH DIFFERENT NUMBER OF CELLS

In this paper the parametric study is carried out to investigate the effect of number of cells in optimal cost of the non-prismatic reinforced concrete (RC) box girder bridges. The variables are geometry of cross section, tapered length, concrete strength and reinforcement of the box girders and slabs that are obtained using ECBO metaheuristic algorithm. The design is based on AASHTO standard s...

متن کامل

Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections

This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002