Sterilization using high-pressure carbon dioxide
نویسندگان
چکیده
Sterilization using high-pressure carbon dioxide Jian Zhang a, Thomas A. Davis a, Michael A. Matthews a,∗, Michael J. Drews b, Martine LaBerge c, Yuehuei H. An d a Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA b School of Materials Science and Engineering, Clemson University, Clemson, SC 29634, USA c Department of Bioengineering, Clemson University, Clemson, SC 29634, USA d Orthopaedic Research Laboratories, Medical University of South Carolina, Charleston, SC 29403, USA
منابع مشابه
High-pressure real-time (129)Xe NMR: monitoring of surfactant conformation during the self-assembly of reverse micelles in supercritical carbon dioxide.
High-pressure (129)Xe NMR has been used to monitor in real time the self-assembly of reverse water-in-supercritical carbon dioxide micelles in the absence of shear, without the need for sensitivity enhancement techniques such as hyperpolarization.
متن کاملSimultaneous Measurement of Carbon Dioxide-Induced Swelling and Gas Sorption in Poly(methyl methacrylate) and Polystyrene
UNILAB, State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China Abstract: This paper deals with the swelling of Poly(methyl methacrylate) and Polystyrene samples in supercritical carbon dioxide in-situ at various temperatures and pressures by using directly optical observation. High pressure cell assembled with microscope and digital...
متن کاملCARBON DIOXIDE MINIMUM MISCIBILITY PRESSURE ESTIMATION (CASE STUDY)
Carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. Depending on the operating pressure, the process might be miscible or immiscible. Minimum miscibility pressure (MMP) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. The miscibility condition is determine...
متن کاملPreparation of PMMA/MWNTs Nanocomposite Microcellular Foams by In-situ Generation of Supercritical Carbon Dioxide
Nanocomposites containing poly(methyl methacrylate) (PMMA) and surface functionalized Multi-Walled Carbon Nanotubes (MWNTs) were synthesized. The dispersion of MWNTs in PMMA was characterized using Transmission Electron Microscopy (TEM).The synthesized nanocomposites were successfully foamed using a simple method based on the in-situ generation of supercritical carbon dioxide (CO2</sub...
متن کاملPreparation of Monolithic Capillary Chromatographic Columns Using Supercritical Fluid as a Porogen Solvent
Monolithic polymeric beds were synthesized in fused silica capillaries using either trimethylolpropane trimethacrylate (TRIM) or a mixture of butyl methacrylate (BMA) with ethylene glycol dimethacrylate (EDMA) as monomers. Carbon dioxide at temperature and pressure conditions above its critical values was used as a porogen solvent. The purpose of using the supercritical carbon dioxide was to ha...
متن کامل