Microwave axial dielectric properties of carbon fiber
نویسندگان
چکیده
Randomly distributed carbon fibers (CFs) reinforced epoxy resin composites are prepared by the pouring method, the dielectric properties of CF composites with different fiber content and length have been performed in the frequency range from 8.2 to 12.4 GHz. The complex permittivity of the composite increases with the fiber length, which is attributed to the decrease of depolarization field, and increases with the volume fraction, which is attributed to the increase of polarization. A formula, based on the theory of Reynolds-Hugh, is proposed to calculate the effective permittivity of CF composites, and validated by the experiments. The proposed formula is further applied to derive the axial permittivity of CF and analyze the effect of fiber length on the axial permittivity.
منابع مشابه
Temperature-dependent Dielectric Measurements of Polyacrylonitrile Fibers during Air Oxidation
Simple direct-current (DC) electrical conductivity measurements are widely used to measure the degree of carbon fiber processing during the latter stages of the carbonization, and during the graphitization, of polyacrylonitrile (PAN) fiber. Unfortunately, DC conductivity measurements are not possible for the oxidation stage and for the early stages of carbonization because the PAN conductivity ...
متن کاملPreparation of a Carbon Doped Tissue-Mimicking Material with High Dielectric Properties for Microwave Imaging Application
In this paper, the oil-in-gelatin based tissue-mimicking materials (TMMs) doped with carbon based materials including carbon nanotube, graphene ink or lignin were prepared. The volume percent for gelatin based mixtures and oil based mixtures were both around 50%, and the doping amounts were 2 wt %, 4 wt %, and 6 wt %. The effect of doping material and amount on the microwave dielectric properti...
متن کاملComplex Permittivity Measurements of Single-walled Carbon Nanotubes at Microwave Frequencies
We report on the high frequency complex permittivity characterization of single-walled carbon nanotubes (SWNT) using broadband and narrowband frequency range techniques. SWNT suspensions, powder and fiber were investigated and the samples were a mixture of semiconducting and metallic nanotubes. Shielded opencircuited coaxial probe (50 MHz to 10 GHz) and dielectric microwave resonators were deve...
متن کاملElectrostatic and Dielectric Measurements for Hair Building Fibers from DC to Microwave Frequencies
In recent years, the hair building fiber has become popular, in other words, it is an effective method which helps people who suffer hair loss or sparse hair since the hair building fiber is capable to create a natural look of simulated hair rapidly. In the markets, there are a lot of hair fiber brands that have been designed to formulate an intense bond with hair strands and make the hair appe...
متن کاملInvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
Radar absorbing materials, i.e. magnetite (Fe3O4) coated carbon fibers (MCCFs) were fabricated by electro-deposition technique. Black-colored single spinel phase Fe3O4 nanoparticles was easily synthesized by hydrothermal method using reduction of a Fe (III) - Triethanolamine complex in an aqueous alkaline solution at 60-80 ◦C. Uniform and compact Fe3O4 films were fabricated on nitric acid treat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 5 شماره
صفحات -
تاریخ انتشار 2015