Anelastic Behavior in Filled Elastomers Under Harmonic Loading Using Distributed Rate-Dependent Elasto-Slide Elements

نویسندگان

  • Wei Hu
  • Norman M. Wereley
چکیده

© 2012 Hu and Wereley, licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Anelastic Behavior in Filled Elastomers Under Harmonic Loading Using Distributed Rate-Dependent Elasto-Slide Elements

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of Magnetorheological Fluid Elastomeric Dampers for Helicopter Stability Augmentation

Title of Dissertation: DEVELOPMENT OF MAGNETORHEOLOGICAL FLUID ELASTOMERIC DAMPERS FOR HELICOPTER STABILITY AUGMENTATION Wei Hu, Doctor of Philosophy, 2005 Dissertation directed by: Professor Norman M. Wereley Department of Aerospace Engineering Conventional lag dampers use passive materials, such as elastomers, to dissipate energy and provide stiffness, but their damping and stiffness levels d...

متن کامل

A concept of polymeric networks with sliding junctions for the time-dependent response of filled elastomers

Constitutive equations are derived for the time-dependent behavior of particlereinforced elastomers at isothermal loading with finite strains. A rubbery polymer is modelled as a network of macromolecules bridged by junctions which can slip with respect to the bulk material under straining. A filled elastomer is thought of as an ensemble of meso-regions where sliding occurs with different rates....

متن کامل

Influence of Confining Pressure on the Crack Growth Behavior in a Highly Filled Elastomer

In this study, the effect of confining pressure on the crack growth behavior in a highly filled elastomer was investigated. The material under investigation contains 86% by weight of hard particles embedded in a rubbery matrix. The specimens were tested at a constant strain rate under a confining pressure. Two confining pressures, 3.45 MPa and 6.9 MPa, and two types of loading, monotonically in...

متن کامل

Analysis of Five Parameter Viscoelastic Model Under Dynamic Loading

The purpose of this paper is to analysis the viscoelastic models under dynamic loading. A five-parameter model is chosen for study exhibits elastic, viscous, and retarded elastic response to shearing stress. The viscoelastic specimen is chosen which closely approximates the actual behavior of a polymer. The module of elasticity and viscosity coefficients are assumed to be space dependent i.e. f...

متن کامل

Finite viscoelasticity of filled rubbers: experiments and numerical simulation

Constitutive equations are derived for the viscoelastic behavior of particle-reinforced rubbers at isothermal loading with finite strains. A filled rubber is thought of as a composite medium where inclusions with high and low concentrations of junctions between chains are distributed in a bulk material. The characteristic size of inhomogeneities is assumed to be small compared to the dimensions...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012