Recrystallization of Drugs: Significance on Pharmaceutical Processing
نویسندگان
چکیده
Not surprisingly, the wide range of effective medicinal agents available today is one of the greatest scientific achievements. Regardless of the advancements in effectiveness and safety of the medicines embedded in dosage forms, the pharmaceutical concept of the latter is growing to be ever more eminent (Adibkia et al., 2011). Following on from recent advancements, in a time of increased considerations to the level of sophistication in designing pharmaceutical dosage forms keeping pace with advances in drug discovery methods, it seems as important as ever to study the physicochemical properties of active pharmaceutical ingredients, prerequisite for a successful product formulation.
منابع مشابه
Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy
An ultrafine/nano grained AZ31 magnesium alloy was produced through four-pass ECAP processing. TEM microscopy indicated that recrystallized regions included nano grains of 75 nm. Pole figures showed that a fiber basal texture with two-pole peaks was developed after four passes, where a basal pole peak lies parallel to the extrusion direction (ED) and the other ~20° away from the transverse dire...
متن کاملApplication of Taguchi Method to Investigate the Effects of Process Factors on the Production of Industrial Piroxicam Polymorphs and Optimization of Dissolution Rate of Powder
Piroxicam has two different crystalline forms (known as needle and cubic forms), that they are different in physicochemical properties such as biological solubility. In the current research, using Taguchi experimental design approach the influences of five operating variables on formation of the piroxicam polymorph shapes in recrystallization were studied. The variables include type of solvent,...
متن کاملApplication of Taguchi Method to Investigate the Effects of Process Factors on the Production of Industrial Piroxicam Polymorphs and Optimization of Dissolution Rate of Powder
Piroxicam has two different crystalline forms (known as needle and cubic forms), that they are different in physicochemical properties such as biological solubility. In the current research, using Taguchi experimental design approach the influences of five operating variables on formation of the piroxicam polymorph shapes in recrystallization were studied. The variables include type of solvent,...
متن کاملOptimization of Hot Workability in Ti-IF Steel by Using the Processing Map
Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...
متن کاملReview on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures
A review on the microstructural evolution in magnesium alloys during severe plastic deformation waspresented. The challenges deserved to achieve ultrafine/ nanostructured magnesium were discussed.The characteristics of the processed materials are influenced by three main factors, including i)difficult processing at low temperatures, ii) high temperature processing and the occurrence ofdynamic r...
متن کامل