2he Dynamic Energy Release Rate for Two Parallel Steadily Propagating Mode Iii Cracks in a Viscoelastic Body

نویسندگان

  • L. Schovanec
  • J. R. Walton
چکیده

The dynamic steady-state propagation of two parallel semi-infinite, mode III cracks is considered for a general, infinite, homogeneous, and isotropic linearly viscoelastic body. A Barenblatt type failure zone is introduced in order to cancel the singular stress and a formula for the energy release rate is derived which provides immediate comparisons with the corresponding single crack problem. The influence of crack speed, crack separation, and material properties upon the energy release rate are illustrated with numerical calculations for both power-law material and a standard linear solid.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers

In this paper, the solution of a moving Volterra-type screw dislocation in an orthotropic layer, bonded between two piezoelectric layers is obtained using complex Fourier transform. The dislocation solution is then employed as strain nuclei to derive singular integral equations for a medium weakened by multiple moving cracks. These equations, which are classified as, Cauchy singular equations, ...

متن کامل

Damage Assessment using an Inverse Fracture Mechanics approach

This paper studies the application of an inverse methodology for problem solving in fracture mechanics using the finite element analysis. The method was applied to both detection of subsurface cracks and the study of propagating cracks. The procedure for detection of subsurface cracks uses a first order optimization analysis coupled with a penalty function to solve for the unknown geometric par...

متن کامل

Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip

The problem of several finite moving cracks in a functionally graded material is solved by dislocation technique under the condition of anti-plane deformation. By using the Fourier transform the stress fields are obtained for a functionally graded strip containing a screw dislocation. The stress components reveal the familiar Cauchy singularity at the location of dislocation. The solution is em...

متن کامل

Path-Independent Integral and Moving Isoparametric Elements for Dynamic Crack Propagation

The objective of this paper is to present a procedure based on moving (or shifting) isoparametric elements for the analysis of dynamic crack propagation. The fracture parameters, such as the stress intensity factors or energy release rates for dynamically propagating cracks, are evaluated by far-field path-independent integrals that were recently derived by the authors. The combined use of the ...

متن کامل

Reconsidering the Boundary Conditions for a Dynamic, Transient Mode I Crack Problem

A careful examination of a dynamic mode I crack problem leads to the conclusion that the commonly used boundary conditions do not always hold in the case of an applied crack face loading, so that a modification is required to satisfy the equations. In particular, a transient compressive stress wave travels along the crack faces, moving outward from the loading region on the crack face. This doe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015