Optical measurement of microscopic torques
نویسندگان
چکیده
In recent years there has been an explosive development of interest in the measurement of forces at the microscopic level, such as within living cells [1, 2, 3], as well as the properties of fluids and suspensions on this scale [4], using optically trapped particles as probes. The next step would be to measure torques and associated rotational motion [5]. This would allow measurement on very small scales since no translational motion is needed. It could also provide an absolute measurement of the forces holding a stationary non-rotating particle in place. The laser-induced torque acting on an optically trapped microscopic birefringent particle [6] can be used for these measurements. Here we present a new method for simple, robust, accurate, simultaneous measurement of the rotation speed of a laser trapped birefringent particle, and the optical torque acting on it, by measuring the change in angular momentum of the light from passing through the particle. This method does not depend on the size or shape of the particle or the laser beam geometry, nor does it depend on the properties of the surrounding medium. This could allow accurate measurement of viscosity on a microscopic scale.
منابع مشابه
Calculation and optical measurement of laser trapping forces on non-spherical particles
Optical trapping, where microscopic particles are trapped and manipulated by light is a powerful and widespread technique, with the single-beam gradient trap (also known as optical tweezers) in use for a large number of biological and other applications. The forces and torques acting on a trapped particle result from the transfer of momentum and angular momentum from the trapping beam to the pa...
متن کاملMeasurement of Orbital Angular Momentum in Optical Tweezers
Several techniques have been proposed and used for the rotation or alignment of microparticles in optical tweezers. In every case the optical torque results from the exchange of angular momentum between the beam and the particle, and, in principle, can be measured by purely optical means. Measurement of this torque could be useful for quantitative measurements in biological systems and is requi...
متن کاملTheory of holographic optical trapping.
Optical traps use the forces exerted by structured beams of light to confine and manipulate microscopic objects in three dimensions. A popular implementation involves structuring the trap-forming beam with computer-generated holograms before focusing it into traps with a high-numerical-aperture optical train. Here, we present a fully vectorial theory for the forces and torques exerted by such s...
متن کاملQuantitative assessment of non-conservative radi- ation forces in an optical trap
The forces acting on an optically trapped particle are usually assumed to be conservative. However, the presence of a non-conservative component has recently been demonstrated. Here we propose a technique that permits one to quantify the contribution of such a non-conservative component. This is an extension of a standard calibration technique for optical tweezers and, therefore, can easily bec...
متن کاملHolographic optical trapping.
Holographic optical tweezers use computer-generated holograms to create arbitrary three-dimensional configurations of single-beam optical traps that are useful for capturing, moving, and transforming mesoscopic objects. Through a combination of beam-splitting, mode-forming, and adaptive wavefront correction, holographic traps can exert precisely specified and characterized forces and torques on...
متن کامل