Engineering properties of sunflower seed: Effect of dehulling and moisture content

نویسندگان

  • Mudasir Ahmad Malik
  • Charanjiv Singh Saini
چکیده

The study diagnosed engineering properties on varying moisture content of sunflower seed and kernel from 7.6 to 25% (wet basis). On increasing moisture, dimensional values increased for both seed and kernel. Bulk density, true density and porosity were found higher for kernel as compared to seed at each moisture content. On increasing the moisture content from 7.6 to 25%, true density, porosity and thousand kernel weight increased. Coefficient of static friction on plywood was found maximum for kernel at 25% moisture content, while it was minimum for seed on glass at 7.6% moisture content. The angle of repose was maximum for kernel as compared to seed. Initial cracking force, average rupture force and average rupture energy for seed and kernel decreased with an increase in the moisture content. The kernel was found to be more resistant to initial cracking than seed. Subjects: Food Analysis; Food Engineering; Processing

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of edible alyssum homalocarpum films for physical and mechanical properties

The effect of dry material, glycerol and ratio of water to seed in alyssum homalocarpum films on their thickness, transparency, moisture content, tensile strength, elongation and water vapor permeability was investigated using mixture response surface methods. Dry material and glycerol were important factors influencing tensile strength, elongation and water vapor permeability. Ratio of water t...

متن کامل

Effect of pre-dehulling treatments on some nutritional and physical properties of navy and pinto beans (Phaseolus vulgaris L.)

The effect of pre-dehulling treatments using low and high temperatures on some nutritional and physical properties of navy and pinto beans was investigated. Beans were exposed to water (14%, 28% and soaking 1:5, w/v for 6 h, 16 and 16 h, respectively) to facilitate seed coat detachment prior to freeze drying (FD) for 48 h or heat drying (HT) for 20 or 60min. Exposure to the highest moisture lev...

متن کامل

Hybrid sunflower seed yield, composition and deterioration after chemical desiccation

The impact of chemical desiccation on yield showed contrasting results depending on seedmoisture content at the time of application. Its effects on seed deterioration are still unknownand could be modified by seed composition. Objectives were to evaluate the impact of chemicaldesiccation on: i) hybrid sunflower seed yield and composition at harvest time, ii) seeddeterioration during long-term s...

متن کامل

Thermal Conductivity of Sunflower Seed as a Function of Moisture Content and Bulk Density

The thermal conductivity of sunflower seed was determined as a function of moisture content, bulk density and temperature which varies from 0.1 to 30.48% (w.b.) and 437.14 to 352.5 kg/m and 22 to 46°C, 3 respectively. The slope of the linear portion ( T versus ln(t)) method was used to analyze the line source heating data for thermal conductivity determination. Bulk density of sunflower seeds f...

متن کامل

Optimization of Edible Alyssum homalocarpum Films for Physical and Mechanical Properties

The effect of dry material, glycerol and ratio of water to seed in alyssum homalocarpum films on their thickness, transparency, moisture content, tensile strength, elongation and water vapor permeability was investigated using mixture response surface methods. Dry material and glycerol were important factors influencing tensile strength, elongation and water vapor permeability. Ratio of water t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017