Enabling Certification by Analysis ___ Modelling of Structural Damping
نویسنده
چکیده
Dissemination Level PU Public x PP Restricted to other programme participants (including the Commission Services) RE Restricted to a group specified by the consortium (including the Commission Services) CO Confidential, only for members of the consortium (including the Commission Services)
منابع مشابه
Size-Dependent Analysis of Orthotropic Mindlin Nanoplate on Orthotropic Visco-Pasternak Substrate with Consideration of Structural Damping
This paper discusses static and dynamic response of nanoplate resting on an orthotropic visco-Pasternak foundation based on Eringen’s nonlocal theory. Graphene sheet modeled as nanoplate which is assumed to be orthotropic and viscoelastic. By considering the Mindlin plate theory and viscoelastic Kelvin-Voigt model, equations of motion are derived using Hamilton’s principle which are then solved...
متن کاملModelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects
The damping ratio of chassis suspension is a key parameter for damping matching of in-wheel motor vehicles (IWMVs). Because the motor is attached to the driving wheel, the initial design method of the damping ratio for traditional cars is not entirely suitable for IWMVs. This paper proposes an innovative initial design method of the damping ratio for IWMVs. Firstly, a traveling vibration model ...
متن کاملA General Rule for the Influence of Physical Damping on the Numerical Stability of Time Integration Analysis
The influence of physical damping on the numerical stability of time integration analysis is an open question since decades ago. In this paper, it is shown that, under specific very general conditions, physical damping can be disregarded when studying the numerical stability. It is also shown that, provided the specific conditions are met, analysis of structural systems involved in extremely hi...
متن کاملHealth Monitoring of Welded Steel Pipes by Vibration Analysis
In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....
متن کاملIdentification of Dynamic Damping Properties of a Flexible Structural Adhesive
In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that ...
متن کامل