The 1-D Heat Equation
نویسنده
چکیده
Rate of heat transfer ∂u = (1) −K0 area ∂x where K0 is the thermal conductivity, units [K0] = MLT U . In other words, heat is transferred from areas of high temp to low temp. 3. Conservation of energy. Consider a uniform rod of length l with non-uniform temperature lying on the x-axis from x = 0 to x = l. By uniform rod, we mean the density ρ, specific heat c, thermal conductivity K0, cross-sectional area A are ALL constant. Assume the sides
منابع مشابه
Flow Analysis Heat and Mass Transfer in a Room
This reports the study on the flow behaviour, heat transfer and contamination distribution in a room. For this purpose the 3-D incompressible Navier-Stokes equations, energy equation and a mass transfer equation which model the concentration of contamination have been applied. For turbulence simulation the two equation standard k- turbulence model was employed. By means of SIMPLE algorithm the...
متن کاملMathematical Modeling of Heat Transfer for Steel Continuous Casting Process
Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...
متن کاملA Boundary Backstepping Control Design for 2-D, 3-D and N-D Heat Equation
We consider the problem of stabilization of an unstable heat equation in a 2-D, 3-D and generally n-D domain by deriving a generalized backstepping boundary control design methodology. To stabilize the systems, we design boundary backstepping controllers inspired by the 1-D unstable heat equation stabilization procedure. We assume that one side of the boundary is hinged and the other side is co...
متن کاملNumerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation em...
متن کاملHeat Conduction in Spherical Composite Vessels
This paper presents an exact analytical solution for two-dimensional conductive heat transfer in spherical composite pressure vessels .The vessels are in spherical shape and fibers are winded in circumferential direction. The analytical solution is obtained under the general boundary conditions which consist of convection, conduction and radiation inside/outside of vessel. The heat transfer equ...
متن کاملStochastic Heat Equation with Multiplicative Fractional-Colored Noise
We consider the stochastic heat equation with multiplicative noise ut = 1 2 ∆u + uẆ in R+ × R , whose solution is interpreted in the mild sense. The noise Ẇ is fractional in time (with Hurst index H ≥ 1/2), and colored in space (with spatial covariance kernel f). When H > 1/2, the equation generalizes the Itô-sense equation for H = 1/2. We prove that if f is the Riesz kernel of order α, or the ...
متن کامل