Kinetics of Vinyl Acetate Emulsion Polymerization in a Pulsed Tubular Reactor. Comparison between Experimental and Simulation Results
نویسندگان
چکیده
A new reactor, the pulsed sieve plate column (PSPC), was developed to perform continuous emulsion polymerization reactions. This reactor combines the enhanced flexibility of tubular reactors with the mixing behavior provided by sieved plates and by the introduction of pulses that is important to prevent emulsion destabilization. The main objective of this work is to study the kinetics of vinyl acetate (VA) emulsion polymerization reactions performed in this PSPC. Therefore, both experimental studies and reaction simulations were performed. Results showed that it is possible to obtain high conversions with rather low residence times in the PSPC.
منابع مشابه
Emulsification in Batch-Emulsion Polymerization of Styrene and Vinyl Acetate: A Reaction Calorimetric Study
Dispersion of liquid–liquid systems is commonly applied in industrial processes such as extraction, suspension, and emulsion polymerization. This article describes the influence of the quality of emulsification on the course and outcome of a batch-emulsion polymerization of styrene and vinyl acetate. From visualization experiments and polymerizations in combination with reaction calorimetric st...
متن کاملCompetitive particle growth at different conditions of oligo-micelle formation in hydro-alcoholic solution of anionic double-chain emulsifier via batch emulsion polymerization of vinyl chloride
The condition of oligo-micelle formation of sodium di-isodecyl sulfosuccinate (SDIDS) emulsifier in hydroalcoholic solutions is used to study particle formation of vinyl chloride emulsion polymerization in a batch reactor. The change on micellization behavior was investigated by critical micelle concentration (CMC) and zeta potential parameters. To detect the occurrence of secondary nucleation ...
متن کاملMiniemulsion Copolymerization of Ethylene and Vinyl Acetate
The copolymerizations of a gaseous monomer (ethylene) and a liquid monomer (vinyl acetate) via emulsion and miniemulsion polymerizations are reported. Reactions in which the vinyl acetate was introduced in both batch and semibatch modes are carried out. (Ethylene introduction is always in a semibatch model since the polymerization is carried out under a constant pressure of ethylene in the reac...
متن کاملSimulation, Optimization & Control of Styrene Bulk Polymerization in a Tubular Reactor
In this paper, optimization and control of a tubular reactor for thermal bulk post-polymerization of styrene have been investigated. By using the reactor mathematical model, static and dynamic simulations are carried out. Based on an objective function including polymer conversion and polydispersity, reactor optimal temperature profile has been obtained. In the absence of model mismatch, de...
متن کاملOptimization of Emulsion Copolymerization Reactions. Experimental Validation
−− Time optimal monomer and reactor temperature set-point profiles were computed and implemented experimentally for the control of copolymer composition and minimization of reaction time in emulsion copolymerization systems. Iterative Dynamic Programming (IDP) was used for the offline calculation of the optimal profiles. This approach can deal with constrained optimization of systems described ...
متن کامل