Title : Synthesis of mono and multidomain YIG particles by chemical coprecipitation or ceramic procedure
نویسندگان
چکیده
Yttrium iron garnet powders have been synthesized by chemical coprecipitation using two different precursors, nitrates and chlorides, and by an oxides mixture route. It is shown that depending on the precursors and synthesis conditions used pure yttrium iron garnet powders can be obtained with a mono or multidomain magnetic behaviour. The yttrium iron garnet crystalline structure, as studied by Raman spectroscopy, was already formed after calcination at temperatures as low as 800 oC when the nitrate precursors were used. However, calcination temperatures of up to 1100 oC were required to obtain yttrium iron garnet powders when the precursors were chlorides or when the oxides mixture route was chosen. The saturation magnetization of the powders correlates well with the structural characterization: when nitrate precursors were used, the saturation magnetization was already close to the bulk value, 26.8 emu/cc, after calcination at 800 oC. However, the saturation magnetization of the powders obtained by the chlorides and oxides mixture routes was close to zero up to calcination temperatures of 1100 oC. Finally, both the chlorides and the oxides mixture routes yield multidomain micron * Corresponding autor. Tel.: +34 985 98 00 58; fax: +34 985 26 55 74 E-mail address: [email protected] (M. Suarez) *Manuscript Click here to view linked References
منابع مشابه
Activation Strategies for Enhancement the Catalytic Activity of Gold Nanocatalysts
Recent advances in nanoscience have led to the development of numerous methodologiesfor controlled synthesis of mono dispersed nanoparticles and/or nanoclusters via surface stabilization by organic capping ligands. The application of these nanoparticles in catalysis and other fields often requires the removal of organic ligands. It is known that the removal of organic capping agents or or...
متن کاملApplication of PVPP-OXA as an efficient catalyst for the synthesis of mono and bulky 1,8-dioxooctahydroxanthenes
An efficient method for the synthesis of mono and bulky 1,8-dioxooctahydroxanthenes was developed by the reaction of dimedone or 1,3-cyclohexadione and aldehydes or some bisaldehydes in the presence of polyvinylpolypyrrolidone supported oxalic acid (PVPP-OXA) as a new polymeric catalyst in ethanol at room temperature. Polyvinylpolypyrrolidone supported oxalic acid was characterized by FT-IR, an...
متن کاملKF/Al2O3: As a Solid Phase and Recyclable Basic Catalyst for Synthesis Mono and Bis Pyrimidine Derivatives
KF/Al2O3 as a green and efficient catalyst has been used for the synthesis of mono and bis pyrimidine derivatives via three-component reaction of amidines, malononitrile, and aldehydes in EtOH at reflux. The great advantage of this catalyst is the ease of handling. KF/Al2O3 can be used and removed by filtration, avoid cu...
متن کاملCTAB-assisted of Fe2O3/CeO2 nanosized prepared by coprecipitation method
Recently, cerium oxide (CeO2) nanoparticles have been widely used in engineering andmedical sciences due to the diversity of their applications. Fe-Ce nanoparticles were synthesized bysimple co-precipitation method via iron nitrate (Fe(NO3)3.9H2O) and cerium nitrate (Ce(NO3)3.6H2O) asprecursor in the presence of cetyltrimethylammonium bromide (CTAB) surfactant. The samples wer...
متن کاملSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کامل