Effects of sterilization treatments on bulk and surface properties of nanocomposite biomaterials

نویسندگان

  • Maqsood Ahmed
  • Geoffrey Punshon
  • Arnold Darbyshire
  • Alexander M Seifalian
چکیده

With the continuous and expanding use of implantable biomaterials in a clinical setting, this study aims to elucidate the influence of sterilization techniques on the material surface and bulk properties of two polyurethane nanocomposite biomaterials. Both solid samples and porous membranes of nondegradable polyhedral oligomeric silsesquioxane poly(carbonate-urea) urethane (POSS-PCU) and a biodegradable poly(caprolactone-urea) urethane (POSS-PCL) were examined. Sterilization techniques included conventional steam sterilization (autoclaving), gamma irradiation, and disinfection via incubating with ethanol (EtOH) for 10 min or 24 h. After treatment, the samples were examined using gel permeation chromatography (GPC), attenuated total reflectance Fourier transform infrared spectroscopy, and tensiometry. Cytotoxicity was evaluated through the culture of endothelial progenitor cells and the efficacy of sterilization method was determined by incubating each sample in tryptone soya broth and fluid thioglycollate medium for cultivation of microorganisms. Although EtOH did not affect the material properties in any form, the samples were found to be nonsterile with microbial growth detected on each of the samples. Gamma irradiation was not only effective in sterilizing both POSS-PCU and POSS-PCL but also led to minor material degradation and displayed a cytotoxic effect on the cultured cells. Autoclaving was found to be the optimal sterilization technique for both solid and porous membranes of the nondegradable POSS-PCU samples as it was successful in sterilizing the samples, displayed no cytotoxic side effects and did not degrade the material. However, the biodegradable POSS-PCL was not able to withstand the harsh environment during autoclaving, resulting in it losing all structural integrity. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2013.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Assessment of Crawler Tractor Effects on Soil Surface Properties

Skidding operations can cause considerable and wide spread soil disturbance. The objective of this study was to evaluate the effects of ground skidding operations on soil compaction, moisture content, and total porosity at different levels of slope and traffic frequency. Four levels of traffic intensity (3, 8, 13, and >13 passes of a Crawler Tractor Onezhets ? 110) and three levels of slope ( ...

متن کامل

Study of the influence of beta-radiation on the properties and mineralization of different starch-based biomaterials.

In this work, the effects of beta-radiation are assessed, for the first time, on starch-based biodegradable polymers, with the aim of using it as an alternative sterilization process to the previously studied sterilization methods. Different doses of radiation were used in order to investigate the possibility of using this sterilization technique as a treatment to tailor the surface and bulk pr...

متن کامل

Effects of nano silica on the Anticorrosive properties of epoxy coatings

In this study a series of epoxy/silica nanocomposites were prepared by using nano silica particles which had different surface modifications. The morphology of the nanocomposite coatings was characterized by scanning electron microscopy SEM. The effects of the hydrophilic and hydrophobic feature of the nano particles on the Tg and anticorrosive properties of nanocomposite coatings were evaluate...

متن کامل

ساخت و مشخصه یابی پوشش نانوکامپوزیتی PDMS-SiO2-CuO بر فولاد زنگ نزن و ارزیابی رفتار آبگریزی آن

Abstract: With the advances in the development of biomaterials for tissue replacement, the attention of scientists has been focused on the improvement of clinical implant properties. In this regard, despite the appropriate properties of the stainless steel, the application of stainless steel as implants has been limited due to the weak corrosion resistivity. The purpose of this paper was prepar...

متن کامل

Slow chlorine releasing compounds: A viable sterilisation method for bioabsorbable nanocomposite biomaterials.

OBJECTIVE Selection of the appropriate sterilisation method for biodegradable materials has been a challenging task. Many conventional sterilisation methods are not suitable for the next generation of biomaterials, mainly due to their complex composition, based on nanomaterials, often incorporating bioactive moieties. In this study, we investigate sterilisation efficacy of slow chlorine releasi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 101  شماره 

صفحات  -

تاریخ انتشار 2013