Synthesis of Titanium Phosphates with Additives and Their Powder Properties for Cosmetics

نویسندگان

  • Hiroaki Onoda
  • Taisuke Yamaguchi
چکیده

As a white pigment, titanium oxide is used for cosmetic application. This oxide is well known to have the photo catalytic activity. Therefore a certain degree of sebum is decomposed by the ultraviolet radiation in sunlight. In this work, titanium phosphates were prepared with additives (urea, sodium lactate, and glycerin) as a novel white pigment. Their chemical composition, powder properties, photo catalytic activity, moisture retention, and smoothness were studied. These white pigments had little photo catalytic activity. The addition of sodium lactate and glycerin improved the moisture retention of titanium phosphates. The slipping resistance of samples became small by the addition of sodium lactate and glycerin. The roughness of samples became small by heating.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of Cu-TiO2Nanocomposite and Investigation of the Effectiveness of PEG, Pectin, and CMCas Additives

Recently, TiO2 has been widely used as a photocatalyst for degradation of environmental pollutants. In the present study, the advantage of metal doping onto TiO2 for enhanced photocatalitic activity has been investigated. Copper-Titanium dioxide nanocomposites were prepared by the sol-gel method in the presence of Carboxy Methyl Cellulose (CMC), Pectin, and Poly Ethylene Glycol (PEG) as additiv...

متن کامل

Synthesis And Characterization Of Nanocrystalline Hydroxyapatite Powder; And The Effects Of Oxide-based Sintering Additives On Tricalcium Phosphate

Calcium phosphate (CP) materials have been used extensively for bone replacement and augmentation due to their similarity to the mineral component of bone. In addition to being nontoxic, they are biocompatible, not recognized as foreign materials in vivo, and most importantly, exhibit osteoconductive behavior, being able to help in bone formation during healing. CPs form an intimate physicochem...

متن کامل

Investigation of zinc oxide additive on the dielectric properties and microstructure of titanium oxide ceramic

In recent years, research into materials with high dielectric constants, including doped titanium oxide, has increased because of the potential for modern microelectronics applications and high-density energy storage. The aim of this study was to investigate the effects of zinc oxide as an acceptor additive on the dielectric properties and microstructure of titanium oxide ceramics. The amount o...

متن کامل

Properties, Application and Synthesis Methods of boron nitride Powder: A Review

h-BN is a multipurpose ceramic material, with exceptional properties and a wide area of application in industry. It is structurally similar to graphite and it resists oxidation to higher temperatures than graphite. It is used in powder form as a mold release agent in metal casting, as a high temperature lubricant or even in cosmetics. hBN can be shaped by hot-pressing and is used as molds or cr...

متن کامل

Investigation of the effective factors on manufacturing calcium phosphates prototypes using 3D printing

Calcium phosphate ceramics has been widely used in the present due to their chemical similarity to bone and good biocompatibility in the physiological environmental and a compatibility with synthetic and natural polymers Recent advancements in additive manufacturing have enabled the fabrication of 3D prototypes with controlled architecture resembling the natural bone. Binder jetting is a versat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013