Fuel Cell Assembly Process Flow for High Productivity
نویسندگان
چکیده
Ibrahim Diakite, University of Texas, Arlington Tyson DiLorenzo, Rensselaer Polytechnic Institute David A. Edwards, University of Delaware Brooks Emerick, University of Delaware Rui Fang, University of Delaware Fangxu Jing, Georgia Institute of Technology Longfei Li, University of Delaware Jennifer Miller, University of Delaware Mark Panaggio, Northwestern University Angela Peace, Arizona State University Christopher Raymond, University of Delaware Yu Sun, University of Delaware Esther Wolff, Rensselaer Polytechnic Institute Matt Zumbrum, University of Delaware and others...
منابع مشابه
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell
In order to present a new and high performance structure of PEM fuel cell and study the influence of the flow direction and distribution on the rate of reactants diffusion, three novel models of vertical reactant flow injection into the anode and cathode reaction area field have been introduced. They consist of one inlet and two inlets and also a continuous channel. The governing equations on t...
متن کاملPerformance modeling and parametric investigation of a solid oxide fuel cell (SOFC)
In his paper, performance modeling and parametric study of a tubular solid oxide fuel cell (SOFC) fed by hydrogen was conducted. The components of the fuel cell system and its reactions were entirely modelled and an electrochemical analysis done for it. A variety of modeling parameters including temperature, working pressure and the air mass- flow rate have been investigated in order to observe...
متن کاملThe effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell
In this paper, three innovative 3-D geometries for flow fields of cathode and anode have been developed to investigate the comparative impact of increasing the multiplicity of the involved anode-cathode channel surface contact on the efficiency of electrochemical reaction via the same membrane electrode assembly (MEA) active area. In the introduced new models, each anode channel includes two, t...
متن کاملThree Dimensional Computational Fluid Dynamics Analysis of a Proton Exchange Membrane Fuel Cell
A full three-dimensional, single phase computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both the gas distribution flow channels and the Membrane Electrode Assembly (MEA) has been developed. A single set of conservation equations which are valid for the flow channels, gas-diffusion electrodes, catalyst layers, and the membrane region are developed and numer...
متن کاملNew Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell
In this study, a more accurate model of fuel cell of molten carbonate was also used that was determined input and output control variables and investigated the behavior of the system with respect to those variables. A more complete kinetic is also implemented for increasing the effectiveness of the presented paper. The input variables include fuel flow rate of cell which is methane and cell vol...
متن کاملEffect of Deflected Membrane Electrode Assembly on Species Distribution in PEMFC
This article presents the results of a numerical study, using computational fluid dynamics (CFD) analysis to investigate the species distribution of proton exchange membrane fuel cells (PEMFCs) with deflected membrane electrode assembly (MEA). These new geometry were examined while employing three-dimensional, single phase, non-isothermal and parallel flow for model of a PEM fuel cell. This num...
متن کامل