Damage Detection of Composite Materials with LAMB Wave Method
نویسندگان
چکیده
The aim of the experimental study described in this paper was Lamb wave method evaluation for damage/ defects detection of epoxi/glass composites. Can be used piezoelectric transducers actuator/sensor glued on the surface of investigated composite, using transmission mode. The chosen control parameter was the sensor signal attenuation because of defects that exists in examinated samples. The proposed monitoring system was efficiently in the detection of damage/defects such as holes, allowing for damage/defect size estimation.
منابع مشابه
Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification
A Lamb wave-based crack detection method for aluminum plates health monitoring is developed in this paper. Piezoelectric disks are employed to actuate and capture the Lamb wave signals. The position of crack is assumed to be aligned with the sensor and actuator. Extraction of high quality experimental results of lamb wave propagation in a plate-like structure is considerably complicated due to...
متن کاملOptimization of Lamb Wave Methods for Damage Detection in Composite Materials
Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents part of an experimental and analytical survey of candidate methods for in-situ damage detection of composite materials. Results are presented for the optimization of Lamb wave techniques applied to quasi-isotropic graphite/epoxy specimens containing representative damage mode...
متن کاملLamb Wave Propagation in Laminated Composite Structures
| Damage detection using guided Lamb waves is an important tool in Structural health Monitoring. In this paper, we outline a method of obtaining Lamb wave modes in composite structures using two dimensional Spectral Finite Elements. Using this approach, Lamb wave dispersion curves are obtained for laminated composite structures with different fibre orientation. These propagating Lamb wave modes...
متن کاملLamb wave-based damage detection of composite shells using high-speed fiber-optic sensing
A Lamb wave-based damage identification method called damage imaging method for composite shells is presented. A damage index (DI) is generated from the delay matrix of the Lamb wave response signals, and it is used to indicate the location and approximate area of the damage. A piezoelectric actuator is employed to generate the Lamb waves that are subsequently captured by a fiber Bragg grating ...
متن کاملStructural Health Monitoring in Composite Materials Using Lamb Wave Methods
Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents part of an experimental and analytical survey of candidate methods for in-situ damage detection of composite materials. Experimental results are presented for the application of Lamb wave techniques to quasi-isotropic graphite/epoxy thin coupons and sandwich beams containing ...
متن کامل