Microfluidic multifunctional probe array dielectrophoretic force spectroscopy with wide loading rates.

نویسندگان

  • In Soo Park
  • Kilho Eom
  • Jongsang Son
  • Woo-Jin Chang
  • Kidong Park
  • Taeyun Kwon
  • Dae Sung Yoon
  • Rashid Bashir
  • Sang Woo Lee
چکیده

The simultaneous investigation of a large number of events with different types of intermolecular interactions, from nonequilibrium high-force pulling assays to quasi-equilibrium unbinding events in the same environment, can be very important for fully understanding intermolecular bond-rupture mechanisms. Here, we describe a novel dielectrophoretic force spectroscopy technique that utilizes microsized beads as multifunctional probes for parallel measurement of intermolecular forces with an extremely wide range of force rate (10(-4) to 10(4) pN/s) inside a microfluidic device. In our experiments, various forces, which broadly form the basis of all molecular interactions, were measured across a range of force loading rates by multifunctional probes of various diameters with a throughput of over 600 events per mm(2), simultaneously and in the same environment. Furthermore, the individual bond-rupture forces, the parameters for the characterization of entire energy landscapes, and the effective stiffness of the force spectroscopy were determined on the basis of the measured results. This method of determining intermolecular forces could be very useful for the precise and simultaneous examination of various molecular interactions, as it can be easily and cost-effectively implemented within a microfluidic device for a range of applications including immunoassays, molecular mechanics, chemical and biological screening, and mechanobiology.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Automated Dielectrophoretic Tweezers-Based Force Spectroscopy System in a Microfluidic Device

We reported an automated dielectrophoretic (DEP) tweezers-based force spectroscopy system to examine intermolecular weak binding interactions, which consists of three components: (1) interdigitated electrodes and micro-sized polystyrene particles used as DEP tweezers and probes inside a microfluidic device, along with an arbitrary function generator connected to a high voltage amplifier; (2) mi...

متن کامل

Dielectrophoretic force microscopy of aqueous interfaces.

A novel scanning probe microscopy technique has allowed dielectrophoretic force imaging with nanoscale spatial resolution. Dielectrophoresis (DEP) traditionally describes the mobility of polarizable particles in inhomogeneous alternating current (ac) electric fields. Integrating DEP with atomic force microscopy allows for noncontact imaging with the image contrast related to the local electric ...

متن کامل

A unified approach to dielectric single cell analysis: impedance and dielectrophoretic force spectroscopy.

In this review we present a unified approach for single cell dielectric spectroscopy. Impedance spectroscopy and dielectrophoretic cell sorting, current microtechnologies applied in electrical analysis of single cells are discussed based on their closely related physical principles. In addition, examples of microfluidic devices will be presented: a microfabricated flow cytometer for single cell...

متن کامل

Microfluidic Single-cell Culture Chip for Individual Trapping, Cultivation and Selective Release of Yeast Cells

A microfluidic cell-culture chip is presented that enables cultivation and release of selected individual cells. Single cells are trapped in a microfluidic channel using mild suction at defined sites, where they are cultivated under controlled environmental conditions. Cells of interest can be selectively released for further downstream analysis by applying a negative dielectrophoretic force vi...

متن کامل

Multifunctional probe array for nano patterning and imaging.

This letter reports the design, fabrication, and testing of a multifunctional scanning probe array for nanoscale imaging and patterning. The probe array consists of multiple cantilever probes, with each probe being able to perform a dedicated function such as scanning probe lithography (e.g., dip pen nanolithography and scanning probe contact printing) or scanning probe microscopy (e.g., atomic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS nano

دوره 6 10  شماره 

صفحات  -

تاریخ انتشار 2012