Construction of a Polyaniline Nanofiber Gas Sensor
نویسندگان
چکیده
and keywords
منابع مشابه
Doped and Dedoped Polyaniline Nanofiber Based Conductometric Hydrogen Gas Sensors
Template-free, rapid polymerisation was employed to synthesize polyaniline nanofibers using chemical oxidative polymerisation of aniline, with HCl as a dopant. The doped and dedoped nanofibers were deposited onto conductometric sapphire transducers for gas sensing applications. The sensors were exposed to various concentrations of hydrogen (H2) gas at room temperature. The sensitivity was measu...
متن کاملA Single Polyaniline Nanofiber Field Effect Transistor and Its Gas Sensing Mechanisms
A single polyaniline nanofiber field effect transistor (FET) gas sensor fabricated by means of electrospinning was investigated to understand its sensing mechanisms and optimize its performance. We studied the morphology, field effect characteristics and gas sensitivity of conductive nanofibers. The fibers showed Schottky and Ohmic contacts based on different electrode materials. Higher applied...
متن کاملA Layered SAW Gas Sensor Based on a Polyaniline/In2O3 Nanofiber Composite
A polyaniline/In2O3 nanofiber composite based layered surface acoustic wave (SAW) sensor has been developed and investigated towards different gases. Chemical oxidative polymerization of aniline in the presence of finely divided In2O3 was employed to synthesize a polyaniline nanofiber/In2O3 nanoparticle composite. The nanocomposite was deposited onto a layered ZnO/64° YX LiNbO3 SAW transducer. ...
متن کاملPolyaniline Nanofiber Based Surface Acoustic Wave Gas Sensors—Effect of Nanofiber Diameter on H2 Response
A template-free rapidly mixed reaction was employed to synthesize polyaniline nanofibers using chemical oxidative polymerization of aniline. Hydrochloric acid (HCl) and camphor sulfonic acid (CSA) were used in the synthesis to obtain 30and 50-nm average diameter polyaniline nanofibers. The nanofibers were deposited onto layered ZnO/64◦ YX LiNbO3 surface-acoustic-wave transducers. The sensors we...
متن کاملManufacture of a Polyaniline Nanofiber Ammonia Sensor Integrated with a Readout Circuit Using the CMOS-MEMS Technique
This study presents the fabrication of a polyaniline nanofiber ammonia sensor integrated with a readout circuit on a chip using the commercial 0.35 μm complementary metal oxide semiconductor (CMOS) process and a post-process. The micro ammonia sensor consists of a sensing resistor and an ammonia sensing film. Polyaniline prepared by a chemical polymerization method was adopted as the ammonia se...
متن کامل