The status of the cw-LINAC-demonstrator

نویسندگان

  • S. Mickat
  • W. Barth
  • A. Jankowiak
چکیده

In June 2009 the Helmholtz-Institute Mainz (HIM) was founded. The research activities of HIM are supported by the integrated department of accelerator physics and integrated detectors (ACID) [1]. Within the scope of ACID a collaboration of the Institute of Applied Physics of University Frankfurt (IAP) and the GSI acceleration division is established. Its longterm task should be the design and the realisation of a superconducting cw-LINAC in parallel to the existing UNILAC at GSI. Such a machine is highly desirable with respect to the progress in the field of Superheavy Elements (SHE), because the UNILAC at GSI is limited in providing a proper beam for SHE and in fulfilling the requirements for FAIR simultaneously. In a first step a prototype of such a superconducting cw-LINAC as a demonstrator is financed by HIM. The aim is a full performance test of the demonstrator with beam at the GSI high charge injector (HLI) in 2012.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

BERLinPro 7-CELL SRF CAVITY OPTIMIZATION AND HOMs EXTERNAL QUALITY FACTORS ESTIMATION

The main scope of this work is the optimization of the Superconducting Radio Frequency (SRF) accelerating cavity design for the Berlin Energy Recovery Linac Project (BERLinPro). BERLinPro shall serve as a demonstrator for 100-mA-class Energy Recovery Liniac (ERL) with CW LINAC technology. High-current operation requires an effective damping of Higher-OrderModes (HOMs) of the 1.3 GHz main-linac ...

متن کامل

Design and Fabrication of the KOMAC RFQ

A RFQ linac (3MeV, 350MHz, 20mA, CW and 324cm in length) is being built for the Korea Multipurpose Accelerator Complex (KOMAC). The physical and engineering design of the H/H RFQ linac are described. The fabrication process for the cold model and structure support is described. The current status of the RFQ is reported.

متن کامل

Status and Challenges of the Spiral2 Facility

SPIRAL2 is a new European Radioactive Ion Beams facility being constructed at the GANIL laboratory (Caen, France). It is based on a High Intensity CW multi-ion Accelerator Driver (Superconducting Linac), delivering beams to a High Power Production system (converter, target, and ion source), producing and post-accelerating Radioactive Ion Beams with intensities never reached before. The major co...

متن کامل

BERLinPro - A COMPACT DEMONSTRATOR ERL FOR HIGH CURRENT AND LOW EMITTANCE BEAMS

The HZB (previously BESSY) was the first institution in Germany to build and operate a dedicated synchrotron light source (BESSY I). About 10 years ago BESSY II, a third generation synchrotron light source, was commissioned and is very successfully running since that time. Due to its expertise in development and operation of accelerator facilities HZB is ideally suited to realize new accelerato...

متن کامل

Multiple-Charge Beam Dynamics in an Ion Linac*

There is demand for the construction of a mediumenergy ion linear accelerator based on superconducting rf (SRF) technology. It must be capable of producing several hundred kilowatts of CW beams ranging from protons to uranium. A considerable amount of power is required in order to generate intense beams of rare isotopes for subsequent acceleration. At present, however, the beam power available ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009