Single-stage AC-to-DC converter with self-driven synchronous rectification that complies with EN61000-3-2 regulations
نویسندگان
چکیده
When low output voltage and EN61000-3-2 compliance are put together, not too many options can be used, especially if the power range is between 300–600 W. This paper presents one of the best solutions to comply with both specifications at the same time: the use of a single-stage topology to comply with the low-frequency harmonic limits combined with a half-bridge converter with complementary control, which is a very good option to obtain low output voltages with high efficiency.
منابع مشابه
A High Efficiency Power Supply with High Power Factor Input
This paper presents a single-stage ZVT full-bridge AC/DC converter for aerospace applications. The detailed operating principle and design consideration of this soft-switched converter are analyzed and described. The proposed circuit topology and control scheme are proposed to exhibit optimum performances (i.e. high power factor, high efficiency, ring-free and low EMI features). A laboratory pr...
متن کاملDesign and Optimization of an Efficient (96.1%) and Compact (2 kW/dm3) Bidirectional Isolated Single-Phase Dual Active Bridge AC-DC Converter
The growing attention for plug-in electric vehicles, and the associated high-performance demands, have initiated a development trend towards highly efficient and compact on-board battery chargers. These isolated ac–dc converters are most commonly realized using two conversion stages, combining a non-isolated power factor correction (PFC) rectifier with an isolated dc–dc converter. This, however...
متن کاملThe Implication of Synchronous Rectifiers to the Design of Isolated, Single-Ended Forward Converters
Synchronous rectification is a commonly used technique to improve the efficiency of DC/DC converters with low (<=5V) output voltages and high output currents. Control of the synchronous rectifiers in forward converters has been accomplished in many different ways, from self-driven to complexly controlled techniques. Most existing control techniques allow the synchronous rectifier’s body diode t...
متن کاملSimulation Of An Efficient AC–DC Step-Up Converter For Low- Voltage Energy Harvesting
In this paper direct AC to DC is converted by proposed model from low AC voltage to high DC voltage in single stage conversion. And this paper presents an efficient AC to DC power that avoids the bridge rectification and directly converts low AC input voltage to high DC output voltage. This proposed converter consists boost converter and buck-boost converter both are connected in parallel to pr...
متن کاملDesign of a 1.5V Output Voltage On-Board DC/DC Converter with Magnetic Components Integrated in a Multilayer PCB
Computer and telecommunication systems tend to demand lower supply voltages than 3.3V. This fact raises the challenge of obtaining high efficiency DC/DC converters with low output voltage. We have implemented a compact converter with an output voltage of 1.5V. The output power is 5W and the converter has been provided with galvanic isolation between input and output sides. The windings of the m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEEE Trans. Industrial Electronics
دوره 50 شماره
صفحات -
تاریخ انتشار 2003