Wet granulation in a twin-screw extruder: implications of screw design.
نویسندگان
چکیده
Wet granulation in twin-screw extrusion machinery is an attractive technology for the continuous processing of pharmaceuticals. The performance of this machinery is integrally tied to its screw design yet little fundamental knowledge exists in this emerging field for granulation to intelligently create, troubleshoot, and scale-up such processes. This study endeavored to systematically examine the influence of different commercially available screw elements on the flow behavior and granulation mechanics of lactose monohydrate saturated at low concentration (5-12%, w/w) with an aqueous polyvinyl-pyrrolidone binder. The results of the work showed that current screw elements could be successfully incorporated into designs for wet granulation, to tailor the particle size as well as particle shape of an agglomerate product. Conveying elements for cohesive granular flows were shown to perform similar to their use in polymer processing, as effective transport units with low specific mechanical energy input. The conveying zones provided little significant change to the particle size or shape, though the degree of channel fill in these sections had a significant influence on the more energy-intensive mixing elements studied. The standard mixing elements for this machine, kneading blocks and comb mixers, were found to be effective for generating coarser particles, though their mechanisms of granulation differed significantly.
منابع مشابه
Sequential calculation of torque in procedure of twin screw extrusion
The drug making resreach has accentuated on extrusion technology for a long time. The advance of drug bioavailibility, bead manufacturing and granulation is assured by extrusion procedures. There are also diverse effects in resereches with respect to the use of process understanging as a tool in quality management. Many initiatives of FDA such as PAT and QBD are getting accepted. In this survey...
متن کاملAspects of Screw Design for Wet Granulation Extrusion
This paper discusses our preliminary trials examining the particle size and particle shape of granules produced by different screw elements in a co-rotating twin-screw extruder. In general, conveying elements did not provide the necessary consolidation to allow large particles to grow in significant quantity, whereas the different mixing elements led to the large particles desired for tablettin...
متن کاملFoam granulation: new developments in pharmaceutical solid oral dosage forms using twin screw extrusion machinery.
This paper investigates foam granulation in a twin screw extruder as a new continuous wet granulation technique for pharmaceutical powder drug formulations. Foamed aqueous binder has a reportedly lower soak-to-spread ratio than drop or spray liquid addition in batch granulation. This work demonstrates a twin screw extruder configuration for foam granulation and subsequently compares the new app...
متن کاملContinuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug.
The article describes the application of a twin-screw granulation process to enhance the dissolution rate of the poorly water soluble drug, ibuprofen (IBU). A quality-by-design (QbD) approach was used to manufacture IBU loaded granules via hot-melt extrusion (HME) processing. For the purpose of the study, a design of experiment (DoE) was implemented to assess the effect of the formulation compo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of pharmaceutical sciences
دوره 99 4 شماره
صفحات -
تاریخ انتشار 2010