Study on the Effect of Carboxyl Terminated Butadiene Acrylonitrile (CTBN) Copolymer Concentration on the Decomposition Kinetics Parameters of Blends of Glycidyl Epoxy and Non-Glycidyl Epoxy Resin

نویسندگان

  • Garima Tripathi
  • Deepak Srivastava
چکیده

The degradation of the epoxy system was studied for the prepared six blend samples with the incorporation of 0 wt% 25 wt% carboxyl terminated butadiene acrylonitrile (CTBN) copolymer, on a dynamic basis using Thermo gravimetric analysis (TGA) technique under a nitrogen atmosphere. The blends were prepared by physical mixing and were cured with diamine. The degradation of each sample followed second-order degradation kinetics, which was calculated by Coats-Redfern equation using best-fit analysis. This was further confirmed by linear regression analysis. The validity of data was checked by t-test statistical analysis. From this value of reaction order, activation energy (E), and pre-exponential factor (Z) were calculated. It was found that the activation energy increased with the addition of liquid elastomer.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking

In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical p...

متن کامل

Estimation of Creep and Recovery of Carboxyl-terminated Butadiene Acrylonitrile-epoxy Shape Memory Polymers under Tensile Loading

The creep and recovery of 5% carboxyl-terminated butadiene acrylonitrile (CTBN) modified epoxy shape memory polymers (SMP) was studied. The results were compared with those for the unmodified epoxy SMP. The glass transition temperatures (Tg) were determined using Advanced Rheometric Expansion System (ARES). The creep behavior of the unmodified epoxy and 5wt.% CTBN modified epoxy SMP were studie...

متن کامل

Toughening mechanisms in elastomer-modified epoxies

The role of matrix ductility on the toughenability and toughening mechanism of elastomermodified, diglycidyl ether of bisphenol A (DGEBA)-based epoxies is investigated. Matrix ductility is varied by using epoxide resins of varying epoxide monomer molecular weights. These epoxide resins are cured using 4,4' diaminodiphenyl sulphone (DDS) and, in some cases, modified with 10vol % carboxyl-termina...

متن کامل

معرفی بایندر جدید بر پایه CTBN/DEO و بررسی خواص مکانیکی و حرارتی الاستومر حاصل از واکنش‌ پخت

Despite the unique properties of epoxy resins, their use is limited in many cases due to their low impact resistance. One of the methods to overcome this limitation is to use compounds for increase Toughness such as carboxyl-terminated butadiene acrylonitrile (CTBN) (94% Wt) in the epoxy matrix. In this study, investigated the curing reaction of CTBN with 1,2,7,8 diepoxyoctane (DEO)(5% Wt) in t...

متن کامل

The Effect of Epoxy-Polysulfide Copolymer Curing Methods on Mechanical-Dynamical and Morphological Properties

Epoxy – Polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.To strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (Epon828) as hard segment was studied. FT-IR spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer.  Results obtained f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011