Solid particle erosion of Bagasse fiber reinforced epoxy composite
نویسندگان
چکیده
Experiments were carried out to study the effects of impingement angle and particle velocity on the solid particle erosion behavior of Bagasse Fiber Reinforced Polymer Composites (BFRPCs). The erosive wear is evaluated at different impingement angles from 30° to 90° at four different velocities of 48, 70, 82 and 109 m/s. The erodent used is silica sand with the size range 150 – 250 m of irregular shape. The result shows brittle behavior with maximum erosion rate at 90° impingement angle. The morphology of the eroded surfaces was examined by using Scanning Electron Microscopy (SEM).
منابع مشابه
Non-destructive evaluation of erosion damage on E-glass/epoxy composites
A non-destructive evaluation method for predicting the residual tensile strength of erosion damaged fiber-reinforced composites was developed based on monitoring the acoustic emission (AE) activity of the composite specimens during uniaxial tensile loading. The developed method was used for estimating the residual strength of E-glass/epoxy composite with ply sequence of [45 / 45 /0 /45 / 45 /0 ...
متن کاملMECHANICAL CHARACTERIZATION AND ANALYSIS OF RANDOMLY DISTRIBUTED SHORT BANANA FIBER REINFORCED EPOXY COMPOSITES
Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...
متن کاملExperimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...
متن کاملMulti-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft
In design and fabricate drive shafts with high value of fundamental natural frequency that represented high value of critical speed; using composite materials instead of typical metallic materials could provide longer length shafts with lighter weight. In this paper, multi-objective optimization (MOP) of a composite drive shaft is performed considering three conflicting objectives: fundamental ...
متن کاملComparison between the frequencies of FML and composite cylindrical shells using beam modal function model
A comparison between the vibration of fiber-metal laminate (FML) and composite cylindrical shells has been studied in this manuscript. Love’s first approximation shell theory has been applied to obtain Strain-displacement relations. In addition, beam modal function model has been used to analyze the cylindrical shell with different boundary conditions. In this manuscript, the frequencies of FML...
متن کامل