Optimized Fuzzy Modelling of a Boiler Superheater
نویسندگان
چکیده
Modelling of systems is very much useful to study the response of a system for different input variations and for the design of control schemes in both real time application and in the off-line simulation. The development of optimized fuzzy model for a boiler superheater of a 210 MW coal fired thermal boiler power plant is reported in this paper. The fuzzy model has been developed first taking into the input output data sequences of the transfer function model. The complexity of the fuzzy model is removed by means of various optimization techniques. The resulting optimized model is complete, compact, and consistent (C). Simulation study has been carried out on the fuzzy model both prior and after optimization to get the response of the superheater for various inputs. These results are validated with the results of the transfer function model and are found to be analogous.
منابع مشابه
Computer modeling of a convective steam superheater
Superheater is for generating superheated steam from the saturated steam from the evaporator outlet. In the case of pulverized coal fired boiler, a relatively small amount of ash causes problems with ash fouling on the heating surfaces, including the superheaters. In the convection pass of the boiler, the flue gas temperature is lower and ash deposits can be loose or sintered. Ash fouling not o...
متن کاملGraphical Representation of Fuzzy State Space of a Boiler System NOOR
Graphical representation is useful to illustrate complex structure in a direct or intuitive way. A graph is a symbolic of network and its connectivity can be simplified as a set of linked notes. In recent studies of complex control system, directed graph has been introduced to define and interpret the interconnection structure underlying the dynamics of the interacting subsystem. Generally, the...
متن کاملRole of Oxide Scale Thickness Measurements in Boiler Conditions Assessment
Oxide scale thickness measurements are used in assessing the life of different components operating at high temperature environment. Such measurements provide an approximation for the temperature inside components such as reheater and superheater tubes. A number of failures were encountered in one of the boilers in one of Kuwaiti power plants. These failure were mainly in the first row of the p...
متن کاملThe Effect of Recovery Furnace
A commercially available computational fluid dynamics code has been used to simulate temperature and flow profiles in the upper, convective heat transfer region of a recovery boiler for different bullnose designs. The convective heat transfer region of the furnace was simulated by examining a zone that begins below the bullnose and ends at the economizer. Superheater tubes and a boiler bank wer...
متن کاملInverse Dynamic Neuro-Controller for Superheater Steam Temperature Control of a Large-Scale Ultra-Supercritical (USC) Boiler Unit
The main focus of this paper is to develop an Inverse Dynamic Neuro-Controller (IDNC) by utilizing the inverse dynamic relationship of the superheater system for a large-scale ultra-supercritical (USC) boiler unit. After a recurrent neural network-based Inverse Dynamic Process Model (IDPM) has been built and trained, it is then used as a feedforward controller to improve the superheater steam t...
متن کامل