Design and Implementation of Robot Arm Control Using LabVIEW and ARM Controller
نویسندگان
چکیده
The design, analysis and implementation of a robot arm system, which is expressed towards its performance with an analytical model by using LabVIEW and embedded system tools was presented in this article. Mathematical modeling of kinematics plays an essential role in design and implementation of a robot arm control. The projected work was focused to control the end effector of the robot arm to achieve any accessible point in an amorphous region using LabVIEW, ARM (Advanced RISC (Reduced Instruction Set Computing) Machine) microcontroller and Dexter ER2 robotic arm. LabVIEW uses analytical method to design the inverse kinematic model of the robot arm. The inverse kinematic model and robot arm control was implemented using LabVIEW and ARM microcontroller. LabVIEW uses the parallel communication to send the joint angles of the robot arm to the ARM. ARM microcontroller uses five PWM (Pulse Width Modulation) signals in order to control the robot arm, which was geared up with servo motors. Robot arm was controlled manually through the LabVIEW GUI (Graphical User Interface) controls. The present paper discussed about the mechanical configuration, analytical modeling, software and hardware of the above said work.
منابع مشابه
The Kinematic Analysis Of Four Degrees Of Freedom For A Medical Robot And Control It By Labview And Arduino Mega2560 (Simulation And Implementation)
ABSRACTThis study presents the kinematic analysis of a four-degree freedom medical robotic arm using the Matlab and the robotic-tool, the arm was designed using a solid work program, As well as details of the control of the real design of this arm using Arduino Mega 2560, The specialist enters the position to be reached by the automatic arm (injection position), Or moving the arm to any p...
متن کاملThe reduction coefficient of PID controller by using PSO algorithm method for Flexible single-arm robot system
This study on the design of PID controllers for flexible single-arm robot system optimizationPSO method is focused so that the coefficients of the PID controller are reduced. In this study,PID controller and PSO algorithm have been described and then by using MATLAB, PIDcontrol was simulated. Then by PSO algorithm, attempts to reduce the PID coefficients are givenby simulation. Finally PID coef...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملOptimization of PID Controller with Supervisory Fuzzy Control for Industrial Robots
It is difficult to control the movement of the robot arm due to its nonlinear structure. PID controller is still in the world because of its simplicity in designing this controller as the main controller. The nonlinear control technique is very complicated, and this is not very interesting in the controller. While fuzzy control has a better performance, it incorporates a fuzzy control with ...
متن کاملLabView Interface with Arduino Robotic ARM
The main focus of this work was to design, develop and implementation of competitively robot arm with enhanced control and stumpy cost. To control the robot we used Lab view, which performs inverse kinematic calculations and communicates the proper angles serially to a microcontroller that drives the servo motors with the capability of modifying position, speed and acceleration.
متن کامل