VI.6 Adaptive Process Controls and Ultrasonics for High Temperature PEM MEA Manufacture
نویسندگان
چکیده
Completed unplanned but promising • experimentation on the use of ultrasonics for pressing of low-temperature (Nafion) MEAs. Submitted two publications for review based on • early unplanned experimentation and testing of low-temperature MEAs produced with both thermal pressing and ultrasonic pressing. Completed modifications of commercial ultrasonic • press and construction of custom tooling for the needs of our experimentation. Completed a working model for manufacturing cost • analysis of high-temperature MEA assembly. Completed testing of the first high-temperature • PEM MEA produced with both ultrasonic welding and sealing.
منابع مشابه
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell
In order to present a new and high performance structure of PEM fuel cell and study the influence of the flow direction and distribution on the rate of reactants diffusion, three novel models of vertical reactant flow injection into the anode and cathode reaction area field have been introduced. They consist of one inlet and two inlets and also a continuous channel. The governing equations on t...
متن کاملTitle of Document : IN SITU PROCESSING OF PtSn ELECTROCATALYSTS FOR CO TOLERANCE IN PEM FUEL CELLS
Title of Document: IN SITU PROCESSING OF PtSn ELECTROCATALYSTS FOR CO TOLERANCE IN PEM FUEL CELLS Robert Utz, Master of Science, 2011 Directed By: Professor Greg Jackson Department of Mechanical Engineering Improved anode CO tolerance is a promising approach for integrating lowtemperature PEM fuel cells with hydrocarbon fuel processors in cost-effective systems for portable and stationary power...
متن کاملMass Transfer Modeling of CO2 Absorption into Blended MDEA-MEA Solution
In this research, the thermodynamics and mass transfer of CO2 absorption has been studied in a mixture of MDEA-MEA amines. A relation is presented for mass transfer flux in the reactive-absorption process. For this purpose, the effective parameters on the mass transfer flux were investigated in both liquid and gas phases. Then, using dimensional analysis with the Pi-Buckingham theorem, the effe...
متن کاملManufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent
Metal porous foams have been eliciting much interest in recent years due to their high capacity of energy absorption. The characteristics of the pores in these materials play an important role on their energy absorption capability and other properties. This study reports the fabrication of aluminum closed-cell foams by accumulative roll-bonding (ARB) technique using calcium carbonate (CaCO3) as...
متن کاملEffect of Sealing Gas Washer Design on a PEM Stack Fuel Cell Performance
In this paper we study the performance of a PEM stack fuel cell after 900 hours of operation. We tried to identify any voltage degradation and its causes. Microscopic cracks on some parts of MEA mainly due to uniformity of pressure, stress concentration and elongation of membrane in the edge of GDL has been identified as the most important cause of this gradual degradation. High contact resista...
متن کامل