Voltage/Current-Mode Universal Filter Using FTFN and CFA
نویسندگان
چکیده
A novel configuration for realizing voltage/current-mode (VM/CM) universal filter using a single four terminal floating nullor (FTFN), a single current feedback amplifier (CFA), two capacitors and three resistors is presented. The VM configuration has three inputs and a single output and implements all the five generic filtering functions through the selection of inputs. This topology enjoys cascadability and does not require any additional active element for facilitating the filter realizations. The same circuit in current-mode has a single input and four outputs and realizes LP, HP and two BP responses simultaneously from which AP and Notch can also be realized. This topology uses grounded resistors and capacitors which are ideal for monolithic integration. Both the topologies enjoy orthogonal control of natural frequency (ω0) and quality factor (Q) by the grounded resistors. The topologies enjoy low active and passive sensitivity figures. Experimental and PSPICE simulation results are also included.
منابع مشابه
Voltage Mode-to-Current Mode Transformation
Abstract— This paper proposes a procedure for converting a class of Op Amp-, FTFN-, CCand CFAbased voltage mode circuits to corresponding current mode circuits without requiring any additional circuit elements and finally from Op Amp-based voltage mode circuits to any of the FTFN, CC and CFA current mode circuits. The latter circuits perform better at high frequency than the former ones. The va...
متن کاملA New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation
The trans-admittance-mode (TAM) might act as a transforming bridge for voltage-mode to current-mode conversion. In this study a new low voltage operated electronically tunable TAM biquad filter structure realizing all the seven standard filtering functions namely; low-pass (LP), band-pass (BP), high-pass (HP), regular-notch (RN), low-pass-notch (LPN), high-pass-notch (HPN) and all-pass (AP) fro...
متن کاملRealization of Voltage mode Universal Filter by Using Single Differential Voltage Current Conveyor Transconductance Amplifier
The paper presents a new voltage-mode universal filter using a differential voltage current conveyor transconductance amplifier (DVCCTA). It has three inputs and single output. The proposed circuit can simultaneously realize low-pass, band-pass, and high pass, band reject and all pass filter functions without changing the circuit topology and passive elements. The circuit exhibits a good freque...
متن کاملVoltage Mode Universal Filter Using Current Conveyor
A second order voltage mode tunable universal filter is presented. The voltage mode filter is based on dual output second generation current controlled current conveyor (DOCCCII). The filter is capable of realizing high pass (HP), low pass (LP), band pass (BP), notch pass (NP) and all pass (AP) responses in voltage mode (VM). The filter employs only two capacitors and hence enjoys minimum compo...
متن کاملVoltage/current-mode universal biquadratic filter using single CCII+
Voltage/current-mode universal biquadratic filter using single plus-type second-generation current conveyor (CCII), two capacitors and two resistors has been presented. The proposed voltage-mode circuit has three inputs and two outputs and can realize all the standard filter functions, which are, lowpass, bandpass, highpass, notch and allpass filters, without changing the circuit topology. One ...
متن کامل