A New Online Identification Methodology for Flux and Parameters Estimation of Vector Controlled Induction Motors
نویسندگان
چکیده
A new online identification methodology for estimation of the rotor flux components and the main electrical parameters of vector controlled induction motors is presented in this paper. The induction motor model is referred to the rotor reference frame for estimation of rotor flux and rotor parameters, and referred to the stator reference frame to estimate stator parameters. The stator parameters estimation is achieved by a prediction error method based on a model structure described by a linear regression that is independent of rotor speed and rotor parameters. The rotor flux components and rotor parameters are estimated by a reduced order extended Kalman filter, using a 4-order state-space model structure where the state equation is described by matrices that are diagonal and independent of rotor speed as well as stator parameters. Both methods work in a boot-strap manner.
منابع مشابه
Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors
Stator flux oriented vector control of induction motor (IM) drives for speed sensorless control has several advantages. But the application of a pure integrator for the flux estimation is difficult due to the presence of measurement noise and dc offset. To overcome these problems, some have used a programmable cascaded low pass filter (PCLPF). In this paper, it is shown that some problems still...
متن کاملComparison of MRAS Based Rotor Resistance Estimator Using Reactive Power and Flux Based Techniques for Space Vector PWM Inverter Fed Induction Motor Drives
The performance of Vector Controlled Induction Motor drive depends on the accuracy of rotor resistance which will vary with temperature and frequency. The MRAS approach using reactive power and flux as a state variable for rotor resistance estimation makes MRAS computationally simpler and easy to design. In this paper, Rotor Flux based MRAS (RF-MRAS) and Reactive Power based MRAS (RP-MRAS) for ...
متن کاملEvaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors
Stator flux oriented vector control of induction motor (IM) drives for speed sensorless control has several advantages. But the application of a pure integrator for the flux estimation is difficult due to the presence of measurement noise and dc offset. To overcome these problems, some have used a programmable cascaded low pass filter (PCLPF). In this paper, it is shown that some problems still...
متن کاملTuning of fuzzy controller coefficients in direct torque control with space vector modulator for the three phase induction motors drive using Metaheuristic algorithms with considering electrical faults.
Among all the drive control methods of induction motors, the Direct Torque Control (DTC) method operates independently of the rotor parameters of the machine and, despite its simplicity, provides good torque control in both stable and transient modes. The use of residual comparators in these drives reduces the torque ripple and variable switching frequency. The most common solution is the use o...
متن کاملImproved Direct Torque Control for Induction Machine Drives Based on Fuzzy Sector Theory
Here, a new fuzzy direct torque control algorithm for induction motors is proposed. As in the classical direct torque control, the inverter gate control signals directly come from the optimum switching voltage vector look-up table, the best voltage space vector selection is a key factor to obtain minimum torque and flux ripples. In the proposed approach, the best voltage space vector is sel...
متن کامل