Buckling Load Evaluation Method for Single Layer Cylindrical Lattice Shells
نویسنده
چکیده
A rational design evaluation procedure is investigated for the elastic overall buckling load carrying capacity of single layer cylindrical lattice shell roof structures. The nature of the imperfection sensitivity of these structures is for the first time reviewed in this paper. This allows the development of the reduced stiffness buckling analytical concept for the lattice shells based upon the introduction of a simple lower bound estimation equation through the use of the so-called continuum shell analogy theory. The linear and nonlinear buckling loads found from conventional finite element analyses are compared with the present estimations. Finally, the elastic-plastic load carrying capacity estimation method through the use of the present elastic lower bound criteria is also proposed.
منابع مشابه
Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
In this study, the behavior of a composite lattice cylindrical shell is investigated in the buckling deforming. Also, the distribution of shell buckling response and the stress field is studied after making some defects on the ribs.Therefore using ANSYS software, a 3D finite element model of the shell has been created for the analysis. Material properties and geometrical data of the shell are o...
متن کاملA New Approach to Buckling Analysis of Lattice Composite Structures
Buckling strength of composite latticed cylindrical shells is one of the important parameters for studying the failure of these structures. In this paper, new governing differential equations are derived for latticed cylindrical shells and their critical buckling axial loads. The nested structure under compressive axial buckling load was analyzed. Finite Element Method (FEM) was applied to mode...
متن کاملBuckling Analysis of Composite Lattice Cylindrical Shells with Ribs Defects
In this paper, the buckling behavior of a composite lattice cylindrical shell is studied and effects of rib defects on the distribution of stress field and buckling response of the shell is investigated. A three dimensional finite element buckling analysis of the lattice shell is carried out using ANSYS suit of program. Geometrical data and material properties of the shell are obtained from the...
متن کاملInvestigation of Axial to Lateral Load ratio on the Buckling of Thin Orthotropic Cylindrical Shells
Buckling analysis of thin cylindrical shells is very important due to their production process. Usually longitudinal and transversal stiffeners are used to increase the buckling stiffness. In this paper, considering a thin cylindrical shell with longitudinal and transversal ribs subjected to axial force and lateral pressure, the influence of different aspect of axial force to lateral pressure ...
متن کاملElastic Buckling Analysis of Ring and Stringer-stiffened Cylindrical Shells under General Pressure and Axial Compression via the Ritz Method
Elastic stability of ring and stringer-stiffened cylindrical shells under axial, internal and external pressures is studied using Ritz method. The stiffeners are rings, stringers and their different arrangements at the inner and outer surfaces of the shell. Critical buckling loads are obtained using Ritz method. It has been found that the cylindrical shells with outside rings are more stable th...
متن کامل