Chemical imaging at atomic resolution as a technique to refine the local structure of nanocrystals.

The challenging problem of mapping the chemical composition of cation columns in individual nanocrystals at atomic resolution is addressed by using a method based on aberration-corrected electron microscopy, core-loss electron energyloss spectroscopy, and simulations. The potential of this novel approach to provide unique structural information, which is the key to rationalizing macroscopic behavior, is illustrated with the analysis of ceria–zirconia mixed oxides, which are nanomaterials with substantial technological impact. Metal nanoparticles supported on this family of oxides are currently materials of interest as catalysts in a variety of chemical transformations in the area of environmental protection, such as low-temperature water-gas shift, selective oxidation of CO in the presence of large amounts of hydrogen, or three-way catalysis. Strong variations in the chemistry of ceria–zirconia mixed oxide catalysts have been observed after they have undergone redox cycles involving reduction treatments at high temperatures ( 1173 K) then oxidation at mild temperatures ( 823 K). In particular their reducibility is significantly enhanced after such aging treatments. Scanning transmission electron microscopy (STEM) techniques have provided crucial information to account for these changes in the redox behavior. High-resolution electron microscopy (HREM) combined with high-angle annular dark-field (HAADF) imaging and tomography have revealed the occurrence of a disorder–order transformation in the cationic sublattice of these oxides, which tend to rearrange into a distribution characteristic of the so called pyrochlore phase. This phase is an archetype structure for A2B2O7 (A= + 3 cation, B=+ 4 cation) compounds and can be considered a fluorite superstructure. The structural transformation takes place during the reduction step of the cycle, in which the fully reduced mixed oxide with Ce/Zr molar ratio 1:1 adopts the Ce2Zr2O7 stoichiometry. Nevertheless, HAADF studies have clearly shown that, in the case of ceria–zirconia mixed oxides, this cation-ordered arrangement is preserved even after full reoxidation, that is, in the oxide with Ce2Zr2O8 stoichiometry, whenever the oxidation temperature does not exceed 823 K. Electron-microscopy studies have also revealed another remarkable feature of the ceria–zirconia aged oxides with the pyrochlore-type cation sublattice: the occurrence of compositional heterogeneities at the nanometer scale. Taking these observations into account and also considering that the disorder–order transition may not be completed in the time scale and under the temperature conditions used in the redox-cycling treatments, the important question arises whether these heterogeneities are in fact occurring on a finer scale, that is, at the atomic level. Such heterogeneities, compatible with the HREM and HAADF observations, will strongly influence the details of the counterpart oxygen sublattice and, consequently, the chemical and catalytic response of these oxides. To date, the atomic-column by atomic-column compositional analysis of the oxidized pyrochlore required to justify such a possibility has not been accomplished. Herein, using the capabilities of an aberration-corrected Nion UltraSTEM microscope (operated at 100 kV) we not only provide the first direct chemical evidence of the cationic order present in the Ce2Zr2O8 oxidized pyrochlore but we also show how atomicresolution electron energy-loss spectroscopy (EELS) mapping, based on core–shell ionization, can be combined with EELS image simulation to detect quite subtle local deviations in the cation sublattice from the completely ordered structure. This information provides a much more accurate structural description of the active catalyst nanocrystals, which must be considered to model both their oxygen-exchange capabilities and, eventually, their catalytic performance. [*] Dr. S. Trasobares, Dr. M. L pez-Haro, Dr. J. A. Perez-Omil, Dr. J. J. Calvino Departamento de Ciencia de los Materiales e Ingenier a Metalfflrgica y Qu mica Inorg nica Facultad de Ciencias, Universidad de C diz Campus Rio San Pedro, 11510-Puerto Real, C diz (Spain) Fax: (+34)956-016286 E-mail: [email protected] Homepage: http://www.uca.es/tem-uca