Sensorless position estimation of Permanent-Magnet Synchronous Motors using a saturation model
نویسندگان
چکیده
Sensorless control of Permanent-Magnet Synchronous Motors (PMSM) at low velocity remains a challenging task. A now well-established method consists in injecting a highfrequency signal and use the rotor saliency, both geometric and magnetic-saturation induced. This paper proposes a clear and original analysis based on second-order averaging of how to recover the position information from signal injection; this analysis blends well with a general model of magnetic saturation. It also proposes a simple parametric model of the saturated PMSM, based on an energy function which simply encompasses saturation and cross-saturation effects. Experimental results on a surface-mounted PMSM and an interior magnet PMSM illustrate the relevance of the approach.
منابع مشابه
Dynamic Performance Analysis of High-Frequency Signal Injection Based Sensorless Methods for Interior Permanent Magnet Synchronous Motors
This paper focuses on three commonly used sensorless methods based on high-frequency signal injection; namely, the rotating sinusoidal injection in the stationary reference frame, the pulsating sinusoidal injection in the estimated synchronous reference frame, and the pulsating square wave injection in the estimated synchronous reference frame. Although these methods have found applications in ...
متن کاملInitial Rotor Position Estimation and Sensorless Direct Torque Control of Surface Mounted Permanent Magnet Synchronous Motors Considering Saturation Saliency
For a p ractical direct torque controlled (DTC) permanent magnet synchronous motor (PMSM) drive system, the information of the initial rotor position, which is usually obtained by a mechanical position sensor, is essential for starting under the full load. In order to avoid the disadvantages of using mechanical position sensors, great efforts have been made on the development of sensorless cont...
متن کاملParameter Identification of Permanent-magnet Synchronous Motors for Sensorless Control
An online parameter identification method is proposed for sensorless control for surface and interior permanent-magnet synchronous motors (SPMSMs and IPMSMs, respectively). As this method does not use rotor position or velocity to identify motor parameters, the identified parameters are not affected by position estimation error under sensorless control. The proposed method that is based on syst...
متن کاملTuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive
In this paper, a novel method based on a combination of Extended Kalman Filter (EKF) with Self-adaptive Differential Evolution (SaDE) algorithm to estimate rotor position, speed and machine states for a Permanent Magnet Synchronous Motor (PMSM) is proposed. In the proposed method, as a first step SaDE algorithm is used to tune the noise covariance matrices of state noise and measurement noise i...
متن کاملA Back-EMF Estimation Error Compensation Method for Accurate Rotor Position Estimation of Surface Mounted Permanent Magnet Synchronous Motors
This paper proposes a back electromotive force estimation error compensation method for accurate rotor position estimation of surface mounted permanent magnet synchronous motors. When estimating the rotor position of surface mounted permanent magnet synchronous motor sensorless drives, a direct current offset error component occurs in the voltage sensor. As a result, the rotor position is disto...
متن کامل