A New System for Electrochemical Investigations Based on Pc and Labview Package
نویسندگان
چکیده
The paper presents a new system for electrochemical researches based on PC and LabVIEW software package. An overview of well known electrochemical methods, such as potential measurements, chronopotentiometry, chronoamperometry, cyclic voltammetry and EIS is given. Electrochemical impedance spectroscopy has been adapted for systems containing large capacitances. For signal generation and recording of the response of investigated electrochemical cell, a measurement and control system was developed, based on a PC P4. The rest of the hardware consists of a commercially available AD-DA converter and an external interface for analog signal processing. The interface is a result of authors own research. The software platform for desired measurement methods is LabVIEW 8.1 package, which is regarded as a high standard in the area of modern virtual instruments. The developed system was adjusted, tested and compared with other commercially available systems.
منابع مشابه
A New PC and LabVIEW Package Based System for Electrochemical Investigations
The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of t...
متن کاملLabVIEW implementation of an enhanced nonlinear PID controller based on harmony search for one-stage servomechanism system
This paper presents a practical implementation for a new formula of nonlinear PID (NPID) control. The purpose of the controller is to accurately trace a preselected position reference of one stage servomechanism system. The possibility of developing a transfer function model for experimental setup is elusive because of the lack of system data. So, the identified model has been developed via gat...
متن کاملImplementation of the Component Characteristic Curve Tracer Using PC-based Acquisition Card
The component characteristic curve tracer consists of hardware and software parts. Hardware part is a PC-based acquisition card mounted in standard personal computer. Software part is developed in National Instruments LABVIEW package. The tracer can be used for educational purposes, as well as in science purposes, for testing semiconductor or any other nonlinear electronic component.
متن کاملNew Pc and Labview Based Robot Control System
This paper presents a new economical solution of robot control system for different sophisticated robot applications. The control system is based on PC controlled servo motor control card and an intelligent control software, which has been developed using high level graphical programming language (LabVIEW). The basic development is an interface software for making connection between the control...
متن کاملA PC - based three - phase system
As the use of power electronics and inductive loads on electrical supplies increases, the requirement to monitor power system quality becomes an increasingly common practice. The negative effects these loads have on supply balance and frequency can be reflected in the efficiency, and therefore the running costs, of said loads. With demand for analysis techniques in industry increasing, and the ...
متن کامل